am-3104 Compatible With Gearboxes:
NeveRest Classic 40 (am-3106)
NeveRest Classic 60 (am-3107)
am-3104_17t Compatible With Gearboxes:
Encoder Cable options:
Encoder cables are not included with this motor, and are sold separately. We have two options:
- am-2992 is a cable which has the white 4-pin connector for the encoder and also the black 4-pin connector for the HiTechnic motor controller.
- am-2993 is a cable which has the white 4-pin connector for the encoder on one end and 4 separate black connectors.
The hall effect encoder mounted on the back of this motor provides 28 pulses per revolution (ppr).
Use in a BaneBots Gearbox:
This motor can be attached to a BaneBots P60 gearbox, or NeveRest Sport series gearboxes See the downloads tab of this page for the step by step assembly video.
- Connector Type: 4-Pin Female JST Encoder,Anderson Powerpoles
- Free Current: 0.4 AMPs
- Gauge: 18 AWG
- Maximum Diameter: 1.500 in. (38 mm)
- Maximum Power: 14 Watts
- Mounting Geometry: 2 M3x0.5 on a 0.984 in. (25 mm) Bolt Circle
- No Load RPM: 6600 RPM
- Output Shaft Size: 0.125 in. (3.175 mm)
- Overall Length: 3.300 in.
- Poles Per Magnet: 7
- Shaft Hardness: 45-50 Rockwell C
- Stall Current: 11.5 AMPs
- Stall Torque: 8.75 oz-in
- Ticks Per Revolution: 28
- Voltage: 12 Volts DC
- Weight: 0.587 lbs
never ending motors
Outstanding across the board.... didn't receive an email when they were avaialable, but was happy to see they were quickly back in stock...
The screws holding the bracket that needs to be removed to attach this to the banebots motor were stripped, so we couldn't get them off. The other one we got was good though.
never rest motors
the never rest (banebots) motors seem to last pretty long, we have been using these since last season and the are much better than the pitsc o motors.
I really like these motors for FTC.