The cold-formed steel gears inside this gearbox are a 0.7 Module tooth profile which is 40% larger than the vast majority of planetary gearbox gears previously used on competition robots. The gears are larger, but the housing's size has been optimized to reduce any unnecessary volume. This means you get more reliability without sacrificing precious space. This housing is also one solid piece of aluminum, ensuring that there is no possibility for misalignment of the stages during assembly or during the rigors of match play.
The two- and three-stage versions of these gearboxes also feature an "HD" stage, with gears approximately double the face width of the other stages as well as a strengthened carrier plate. These larger gears on the output stage ensure that it will handle heavy or cantilevered loads without worry. The carrier plates are made of hardened 4140 steel and interface to the output shaft with a robust hex bore. New for 2019 we are opening up the use of every available gear ratio with every available motor input meaning there are some combinations that could theoretically exceed the gearboxes design characteristics. As such the blanket warranty we offered on these gearboxes in the past will be discontinued for future purchases. Rest assured that AndyMark still stands behind our product 100% and if you feel that there is a problem with your gearbox or any of our products please contact us and we will make it right. To help you decide which gearboxes to use for your application please reference the below table which includes the maximum torque that the gearbox is designed to take before it will fail.
A free packet of red tacky grease (am-2768) is included with every gearbox purchased. This grease must be used to coat every internal surface of the gearbox before use.
The 57 Sport includes mounting hardware for any 500 or 700 series motor including the AndyMark RedLine, the VexPro 775pro, the AndyMark RS775-5, the BaneBots RS775, the BaneBots RS550, and the AndyMark NeveRest. To install one of these motors, first, remove any installed pinion from the motor and press on the included pinion gear using an arbor press or bench vice. This press-fit ensures a solid mechanical connection between the pinion gear and the motor. This pinion assembly is not susceptible to vibration and never needs to be checked once installed. All ratios of Blue Sport Gearboxes use a 4:1 input stage, with the same tooth count pinion, so motors and gearboxes can be switched out with ease.
Common Physical Specifications:
- Four 10-32 0.25 in. deep tapped holes on a 1/2 in. by 1 in. or 1 in. square grid, on two opposite faces
- 0.5 in. Hex Profile
- 1.0 in. Length
- Motor Input: NEO 550, 775, NeveRest
- Motor Quantity: 1
- Ratio: 4:1, 12:1, 16:1, 20:1, 36:1, 48:1, 64:1, 80:1, 100:1
Easy to use, simple design
We had no trouble teaching kids how to assemble, disassemble, grease, and install. Be sure to get the pinions pre-installed on your motors if you’re not used to doing it yourself.
This gearbox is well designed and built. I can tell it will last a long time under stress. Highly recommended!
Very nice looking and well constructed gear boxes. You won't find this craftsmanship overseas.(well, maybe Germany ) but these are American & affordable. Everything inside is smooth turning, gears mesh nicely. Money well spent.😎👌
I haven't use it immediately because the housin...
I haven't use it immediately because the housing is too bulky. I'm keeping it for future project.
We have used these for the last few years and h...
We have used these for the last few years and have never had an issue.
"Very solid gearbox."
"Easy to assemble, and very light for its robust construction. I really like the press-fit pinion. Makes using 700 and 500 frame size motors a quick option during prototyping."