Home > Electrical Components > Controls System Packages > Control Systems Parts >

Sensor Screen (am-3212)
Sensor Screen (am-3212)
Prototype Shown (batteries not included)
Price: $69.00
Sale Price: $58.65

Stock Status:(Out of Stock)

Info Downloads More
Product Overview:
Whether in the shop or in the field, when you need to check sensor functionality the Sensor Screen will help. This self-contained device will let you plug in robot sensors and view their readouts separate from your robot, providing crucial troubleshooting information. Future sensors can be added through an SD card, protecting your Sensor Screen against obsolescence.

Check out our Github page and Subscribe to be notified about software updates. Is there a sensor that you think should be in this? Send an email to support@andymark.com with your suggestions.

  • Updatable with an SD card
    • Firmware updates in the future to add sensors
  • Data can be seen in a voltage or ADC mode (0-1023)
  • USB Serial Data Output:
    • Format: Menu Number, Timestamp, Sensor Data (ADC)
  • Mulitcolor LED
    • Provides sensor feedback
  • Powered by 9v for mobility
  • Comes with:
    • 1 - Sensor Screen
    • 1 - 3D Printed Sensor Screen Case
Tested Sensors:

Average Customer Review: 5 of 5 Total Reviews: 3 Write your own review!

  0 of 0 people found the following review helpful:
Looking forward to using this July 17, 2017
Reviewer: Michael Anderson from Herndon, VA United States  
This comes as a kit.  But, the capabilities for being able to test sensors without the control system are important.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
An Excellent device to test your sensors! May 16, 2016
Reviewer: Mike Bagstad from Roseville MN  
I got a chance to use one of these, with the help of AM, at the championships a couple of weeks ago.  We had a CIMcoder that didn't seem to be working quite right.  I spoke with AM about it, and they came over to our pit with the tester.  We connected it, and discovered that one of the 2 cimcoders wasn't putting any counts out until it was rev'ed up to about 1500-2000 RPM.  
It was really handy in that it powers the sensor, gives a direct readout of the RPM and direction.  We still have to figure out what's up with the cimcoder once the robot is shipped back, but this tool is really handy and we are going to get one!
2846 FireBears

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Sensor Screen February 11, 2016
Reviewer: Art Fau from Pennsaken, NJ United States  
Good documentation Needs and SD card for updating Small device with a lot of features Expandable so never worrying about obsolences.

Was this review helpful to you?

Browse products in the same categories:

Electrical Components > Controls System Packages > Control Systems Parts
Electrical Components
Browse ALL Products