Many of the AndyMark staff are attending the FIRST Championship Events in Houston and Detroit, so we will have limited support in the office between 4/17 - 4/26. You can contact us via e-mails as needed. We appreciate your understanding!
SpinBox Encoder Mounting Hardware Kit
am-2473
$13.50
Designed to be used with US Digital Encoders. This is designed to fit onto the AndyMark SpinBoxThis is a redesign as it used to use the CIM Spacer (am-0555). We found that it was to wide for the CI...Read More
0 reviews
Write a ReviewProduct Overview
Designed to be used with US Digital Encoders. This is designed to fit onto the AndyMark SpinBox
This is a redesign as it used to use the CIM Spacer (am-0555). We found that it was to wide for the CIM Motors with it's current key placement. We now use three of the CIM spacer 125 which is about half the width to allow the key on the shaft to fit in the gear.
Included Hardware:
This is a redesign as it used to use the CIM Spacer (am-0555). We found that it was to wide for the CIM Motors with it's current key placement. We now use three of the CIM spacer 125 which is about half the width to allow the key on the shaft to fit in the gear.
Included Hardware:
- Three - am-2223 CIM Spacer 125
- One - am-0032 2x2x14mm machine key
- One - am-0925 Nylon Spacer
- One - am-0440 370x375 Spacer
- Two - #10-32 1250 Screws (Buy as am-1194)
Specifications
- Weight: 0.1 lbs
Documents
Guide(s)
Don't see what you need?
Recommendations
