This adapter converts an 8 mm keyed shaft to 1/2 in. hex. Description Specifications Documentation The keyway is 2 mm wide. This allows y...

This coupling has geometry to capture 1/2 in. hex shafts with an inside hex profile as well as 1/2 in. keyed shafts with an additional 1/8th in. ke...

These adapters are intended to be a high strength solution to adapt the Falcon Spline to any product that has a 1/2 in hex bore. Description Spe...

This adapter converts a 6mm D shaft to a larger hex version to be used with standard products. Description Specifications Documentation A...

These steel adapters convert a smaller shaft to a larger one or reduce a larger bore to a smaller size. Description Specifications Documentatio...

These adapters convert the bores in our two-inch Dualie Omni Wheels from the starting 14 mm hex into more commonly used 0.500 in, 0.375 in, or 5mm ...

A standard Hex Adapter to 3/8 in. square socket driver. Specifications Documentation Drive Size: 3/8 in. Square Length: 2 in. Weight...

This coupler joins two hex shafts for more length. Description Specifications Documentation Whether you have shafts that are too short or ...

This adapter converts the bore in our 35 mm Dualie Omni Wheels from the starting 8 mm Round into a 5 mm hex bore. Description Specifications D...

Description Specifications Documentation This Adapter is designed for using traditional AndyMark ⅜ inch hex products in build systems designe...