CIM Sport Gearbox

$64.00 – $96.00

The CIM Sport is a competition tested high performance line of planetary gearboxes from AndyMark and BaneBots. The CIM Sport features numerous improvements over previous planetary gearboxes used on...Read More

0 reviews

Write a Review

Product Overview

The CIM Sport is a competition tested high performance line of planetary gearboxes from AndyMark and BaneBots. The CIM Sport features numerous improvements over previous planetary gearboxes used on FIRST Robotics Competition robots.

The cold formed steel gears inside this gearbox are a 0.7 Module tooth profile which is 40% larger than the vast majority of planetary gearbox gears previously used on competition robots. The gears are larger, but the housing's size has been optimized to reduce any unnecessary volume. This means you get more reliability without sacrificing precious space. This housing is also one solid piece of aluminium, ensuring that there is no possibility for misalignment of the stages during assembly or during the rigors of match play.

Three stage, and now optionally two stage, versions of these gearboxes also feature an "HD" stage, with gears approximately double the face width of the other stages as well as a strengthened carrier plate. These larger gears on the output stage ensure that it will handle heavy or cantilevered loads without worry. The carrier plates are made of hardened 4140 steel and interface to the output shaft with a robust hex bore. New for 2019 we are opening up the use of every available gear ratio with every available motor input meaning there are some combinations that could theoretically exceed the gearboxes design characteristics. As such the blanket warranty we offered on these gearboxes in the past will be discontinued for future purchases. Rest assured that AndyMark still stands behind our product 100% and if you feel that there is a problem with your gearbox or any of our products please contact us and we will make it right. To help you decide which gearboxes to use for your application please reference the below table which includes the maximum torque that the gearbox is designed to take before it will fail.

A free packet of red tacky grease (am-2768) is included with every gearbox purchased. This grease must be used to coat every internal surface of the gearbox before use.

The CIM Sport includes mounting hardware for any CIM style motor including the CIM, the MiniCIM, or the NEO. To install one of these motors, first remove any installed pinion from the motor and press on the included pinion gear using an arbor press or bench vice. This press fit ensures a solid mechanical connection between the pinion gear and the motor. This pinion assembly is not susceptible to vibration and never needs to be checked once installed. All ratios of Blue Sport Gearboxes use a 4:1 input stage, with the same tooth count pinion, so motors and gearboxes can be switched out with ease.

The CIM Sport can be used with the optional alternative short back block (am-3769). This can be used to shorten any ratio of the gearbox by 0.92 in. and lighten it by 0.23lb. To use this back block the CIM output shaft must be cut down by 0.92 in. and the pinion pressed onto this shortened shaft. For detailed instructions please see the Motor Installation Guide under the downloads tab.


Part Number Ratio Weight Length Stall Torque* Rated Torque Free Speed*
am-4007_004 4:1 SD 0.98 lb 3.68 in. 7.1 ft-lbs 120 ft-lbs 1320 rpm
am-4007_012 12:1 SD 1.19 lb 4.18 in. 21.4 ft-lbs 135 ft-lbs 440 rpm
am-4008_012 12: HD 1.28 lb 4.43 in. 21.4 ft-lbs 170 ft-lbs 440 rpm
am-4007_016 16:1 SD 1.20 lb 4.18 in. 28.6 ft-lbs 120 ft-lbs 330 rpm
am-4008_016 16:1 HD 1.29 lb 4.43 in. 28.6 ft-lbs 160 ft-lbs 330 rpm
am-4007_020 20:1 SD 1.20 lb 4.18 in. 35.7 ft-lbs 110 ft-lbs 260 rpm
am-4008_020 20:1 HD 1.30 lb 4.43 in. 35.7 ft-lbs 140 ft-lbs 260 rpm
am-4008_036 36:1 HD 1.49 lb 4.93 in. 64.3 ft-lbs 170 ft-lbs 140 rpm
am-4008_048 48:1 HD 1.52 lb 4.93 in. 85.8 ft-lbs 170 ft-lbs 110 rpm
am-4008_064 64:1 HD 1.50 lb 4.93 in. 114.4 ft-lbs 160 ft-lbs 80 rpm
am-4008_080 80:1 HD 1.52 lb 4.93 in. 143.0 ft-lbs 140 ft-lbs 60 rpm
am-4008_100 100:1 HD 1.52 lb 4.93 in. 178.8 ft-lbs 140 ft-lbs 50 rpm

Common Physical Specifications:

Mounting Features:
  • Four 10-32 0.25 in. deep tapped holes on a 1/2 in. by 1 in. or 1 in. square grid, on two oppisite faces
Output Shaft Geometry:
  • 0.5 in. Hex Profile
  • 1.0 in. Length

*Theoretical maximum values when paired with a CIM Motor (am-0255)

Specifications

  • Ratio: 4:1,12:1,16:1,20:1,36:1,48:1,64:1,80:1,100:1

Recommendations

Top of Page