Nano Tube 31, Two 1/2 in. Key Shafts

am-0688

$222.00

This product is currently unavailable for purchase.

Product Usage:All AndyMark gearboxes require grease for proper operation and long life. We suggest using our red tacky grease, am-2768. We also encourage that the user powers the gearbox continuous...Read More

Product Overview

Product Usage:
All AndyMark gearboxes require grease for proper operation and long life. We suggest using our red tacky grease, am-2768. We also encourage that the user powers the gearbox continuously for 30 minutes without grease to allow the gear teeth to wear in. While we do design with short run times in mind, this 'run in' period for smooth gearbox operation, is recommended. Once this is completed, thoroughly grease the gear teeth periodically to ensure smooth operation.

This 31-inch-long Nano Tube houses two complete gearboxes, each having the same gearing and shafts as the Nano with 500 Key Shaft. Nano Tube accepts two 2.5 inch CIM Motors. Hardware is included for attaching this motor.

This product is intended to be used as a complete drive module for the side of a 4-wheel-drive robot. A second tube is to be used on the opposite side of the robot in order to make the complete drive chassis. Version: 2-shaft, 500 Key

Weight: 4.8 Pounds, not including motors or encoders

Optional Gear Ratios:

Ratio CIM Gear Lg. Cluster Gear Sm. Cluster Gear Lg. Output Gear
10.71:1 14 tooth 50 tooth 16 tooth 48 tooth
8.45:1 14 tooth 50 tooth 19 tooth 45 tooth
5.95:1 14 tooth 50 tooth 24 tooth 40 tooth


Weight Reductions with Optional Parts:
Aluminum Large Cluster Gear can replace the standard steel 50 Tooth Large Cluster Gear.
Aluminum Large Output Gear can replace the standard steel 50 Tooth Large Output Gear.

Optional Encoder:
An optional Encoder Package can be purchased and added to this Toughbox. If you already have a US Digital Encoder to fit this Toughbox, this Encoder Mount Pad will help you mount the encoder to the Toughbox. Here is a guide for encoder installation and alignment.

Aluminum Hex Output Shaft:
The Toughbox Nano Tube can use an optional Short 1/2" Hex Aluminum Output Shaft with Magnet for Toughbox® Series (am-am-0397a) as a separate purchase but a FR8ZZ-Hex bearing MUST also be ordered SEPARATELY to replace the FR8ZZ bearing supporting each output shaft.

Made in the USA:
Bearings and screws were not made in the USA. All other components were designed, manufactured and assembled in the United States of America.

Specifications

  • Input Gear: CIM Gear, 14 tooth, 0.315 in. bore w/ 2mm keyway
  • Large Cluster Gear: 50 tooth, 3/8 in. hex bore
  • Large Output Gear: 50 tooth, 1/2 in. hex bore
  • Material: 6061 Aluminum, 4140 Steel
  • Output Shaft: 1/2 in. diameter, 4140 steel with 1/8" keyway
  • Small Cluster Gear: 14 tooth, 3/8 in. hex bore

Recommendations

1 review

  1. star star star star empty_star 4.0 out of 5 stars

    Review

    cool part, but we won;t be using it this year after all.

Top of Page