Inline Pressure Regulator & Gauge with 1/8 in. NPT & 1/4 in. Press-in Tube Fittings
This is an all in one pressure regulator and low pressure side gauge perfect for lightweight pneumatic systems where you need to mount a regulator off a hard fitting for example a female threaded f...Read More
0 reviews
Write a ReviewProduct Overview
This is an all in one pressure regulator and low pressure side gauge perfect for lightweight pneumatic systems where you need to mount a regulator off a hard fitting for example a female threaded fitting, or a manifold. It features 1/8 in. NPT input and 1/4 in. push to connect output. a small pressure regulator, and a small gauge. Combining these parts eliminates at least 4 potential leak points from your system and significantly reduces the volume and weight of the needed parts letting you take advantage of every last cubic inch and ounce on your robot.
| NPT THREAD
Note: NPT Thread Size is a nominal pipe size and does not represent the actual diameter |
||||
|---|---|---|---|---|
| Pipe Size (NPT) | 1/8 | 1/4 | 3/8 | 1/2 |
| Thread Size (NPT) | 1/8-27 | 1/4-18 | 3/8-18 | 1/2-14 |
| Thread Measuring Diameter | 3/8 Inch | 1/2 Inch | 5/8 Inch | 3/4 Inch |
Specifications
- Depth: 0.59 in.
- Height: 3.21 in.
- Material: Plastic Body
- Operating Pressure: 0-150 psi
- Port(s): 1/4 in. Female Press-In, 1/8 in. NPT
- Product Lifecycle: discontinued
- Width: 1.44 in.
Returns
Returns are not accepted for this product.
Recommendations
