0.5 in. Hex Aluminum Spacer Stock
$2.20 – $29.00
Sourcing the right stock for the right job can be hard sometimes. No longer is that true for 1/2 inch hex spacer stock! Offered in precisely machined 1.2 inch sections as well as one, three, and si...Read More
Have a more light weight design in mind? Check out our molded plastic hex spacers for your lower load assemblies.
The anodizing process may result in colors that are not exact to the reference photo. FED-STD-595 is a color description system. These anodized products can be described by this system as follows:
- Inside Diameter: 0.5 in. [12.7 mm] (1/2) Hex
- Material: Aluminum 6005A-T61
- Outside Diameter: 0.7 in. Round
- Tolerance: (+/- 0.5in.) for lengths over 1ft, (+/- 0.020 in.) for lengths under 1ft
- Weight: 0.226 lbs/ft
This is a close fitting spacer for 1/2 inch hex shaft. It can be cut to length. Extreme caution is needed when clamping to cut if you do not have an appropriate lathe as the alloy deforms under moderate forces. If clamping in a vice it is best to insert a piece of hex shaft to support the work. With caution makes spacers for various assemblies.