EVERYBOT 2022

EVERYBOT 2022

The Robonauts' Everybot, with a final budget of $1000, is an affordable, competitive, and elegant robot intended to play the FIRST Robotics Competition challenge. Everybot can be built with nothing but basic tools and items found in either the kit of parts or purchased from your local hardware store, online retailers, such as McMaster-Carr, Metals Depot, or FRC retailers, such as AndyMark, REV Robotics, Swyft Robotics, The Thrifty Bot, VEXpro.

​The dimensions in this year's Everybot document are nominal dimensions, unless otherwise noted. The Everybot was built using only basic shop tools and was designed to work with a large range of machining tolerance.

Refer to The 2022 Robonauts Everybot Low Resource Build or the Everybot Discord for up to date information and to post questions.

Below is identical or very similar parts to the 2022 Robonauts' Everybot -- Bill of Materials

Drivetrain Arm Intake Climber & Electronics Bumpers

Try out our QUICK ORDER page, quickly add a list parts with proper quantities!

PLEASE NOTE: Out of stock of an items will not add to your cart
ALWAYS verify what YOUR team wants
These lists may add all options, remove what is not needed

CSV - ALL Items/Options CSV - Drivetrain CSV - Arm CSV - Intake CSV - Climber & Electronics CSV - Bumpers

==Drivetrain==

Select specific parts here or use the Quick Order List found above.

==Arm==

Select specific parts here or use the Quick Order List found above.

CIM Sport Gearbox 16:1

am-4007_016

(OPTION A)

CIM Sport Gearbox 20:1

am-4007_020

(OPTION B)

Left Triangle Bracket

am-3210L

("Inside Corner Bracket")

Right Triangle Bracket

am-3210R

("Inside Corner Bracket")

5 feet of 1/8 in. ID, 3/8 in. OD Black Surgica...

am-3581-5

(Used in place of Springs)

3/16 in. Diameter 0.126 to 0.25 in. Grip Steel ...

am-1226

(Used in Arm, Intake & Climber)

1/2 in. Steel Hex Shaft Stock

am-0856-3

(Used in Arm & Intake)

10-32 x 0.5 in. Socket Head Cap Screw

am-1002

(Used in Arm, Climber & Electronics)

10-32 x 0.75 in. Socket Head Cap Screw

am-1047

(Used in Arm, Climber & Electronics)

10-32 Nylock Nut

am-1042

(Used in Arm, Climber & Electronics)

Mega Gusset Starter Pack

am-4193

(Tie Plate substitute)
(Used in Arm, Intake & Climber)

Box Tube Extrusion
1"x1" 0.63" Wall

am-4203-6

(Used in Arm & Climber)

Box Tube Extrusion 2x1, 0.063 in. Wall

am-3214-6

(Used in Arm & Intake)
(OPTION A)

Box Tube Extrusion 2x1, 0.125 in. Wall

am-4205-6

(Used in Arm & Intake)
(OPTION B)

==Intake==

Select specific parts here or use the Quick Order List found above.

3/16 in. Diameter 0.126 to 0.25 in. Grip Steel ...

am-1226

(Used in Arm, Intake & Climber)

1/2 in. Steel Hex Shaft Stock

am-0856-3

(Used in Arm & Intake)

775 Motor MultiMount

am-4108a

(Optional)

24 Tooth HTD Pulley Extension

am-3404

(Needed for 15 mm Belt)

Shipping Hub Inner Pipe

am-4552

(substitute A for 1/2" PVC)

Horizontal Short Barrier Pipe

am-4548

(substitue B for 1/2" PVC)

Vertical Long Barrier Pipe

am-4549

(substitue C for 1/2" PVC)

1/2 in. Churro Different Lengths

am-2974

(substitute for Threaded Rod)

2.25 in. HD Compliant Wheels

am-3949_green

(substitute for Foam Pipe)

Hex Molded Spacers
0.5" Hex - 1" Long

am-3948-1000

(Spacer between wheels)

10-32 x 0.375 in. Socket Head Cap Screw

am-1359

(substitute for 1/4" long)

#10 Flat Washer

am-1026

(substitue for #8 Washer)

Mega Gusset Starter Pack

am-4193

(Tie Plate substitute)
(Used in Arm, Intake & Climber)

Box Tube Extrusion 2x1, 0.063 in. Wall

am-3214-6

(Used in Arm & Intake)
(OPTION A)

Box Tube Extrusion 2x1, 0.125 in. Wall

am-4205-6

(Used in Arm & Intake)
(OPTION B)

==Climber & Electronics==

Select specific parts here or use the Quick Order List found above.

3/16 in. Diameter 0.126 to 0.25 in. Grip Steel ...

am-1226

(Used in Arm, Intake & Climber)

10-32 x 0.5 in. Socket Head Cap Screw

am-1002

(Used in Arm, Climber & Electronics)

10-32 x 0.75 in. Socket Head Cap Screw

am-1047

(Used in Arm, Climber & Electronics)

10-32 Nylock Nut

am-1042

(Used in Arm, Climber & Electronics)

1 in. Steel Ball Bearing

am-2832_bearing

(can be used as Ballast)

Mega Gusset Starter Pack

am-4193

(Tie Plate substitute)
(Used in Arm, Intake & Climber)

Box Tube Extrusion
1"x1" 0.63" Wall

am-4203-6

(Used in Arm & Climber)

Blue EuroBoard 23 in. Square

am-3588B

(Option to Mount Elec...)

Red EuroBoard 23 in. Square

am-3588R

(Option to Mount Elec...)

==Bumpers==

Select specific parts here or use the Quick Order List found above.

Top of Page