Discontinued
Bolt Pattern
Bore
- 0.125 in. [3.2 mm] (1/8) Round (3)
- 0.141 in. [3.6 mm] Round (1)
- 0.157 in. [4.0 mm] Round (1)
- 0.166 in. [4.2 mm] Round (1)
- 0.172 in. [4.4 mm] Round (1)
- 0.188 in. [4.8 mm] (3/16) Round (2)
- 0.192 in. [4.9 mm] Round (3)
- 0.197 in. [5 mm] Hex (3)
- 0.197 in. [5 mm] Round (1)
- 0.215 in. [5.5 mm] Round (2)
- 0.218 in. [5.5 mm] Round (1)
- 0.236 in. [6 mm] D (1)
- 0.236 in. [6 mm] Round (2)
- 0.236 in. [6.0 mm] Round (1)
- 0.250 in. [6.4 mm] (1/4) Round (2)
- 0.252 in. [6.4 mm] Round (3)
- 0.257 in. [6.5 mm] Round (2)
- 0.313 in. [8 mm] (5/16) Hex (1)
- 0.313 in. [8 mm] (5/16) NUB Bore (3)
- 0.313 in. [8 mm] (5/16) Round (11)
- 0.320 in. [8.1 mm] Round (2)
- 0.325 in. [8.3 mm] Round (1)
- 0.375 in. [9.5 mm] (3/8) Hex (15)
- 0.375 in. [9.5 mm] (3/8) Round (4)
- 0.382 in. [9.7 mm] Round (3)
- 0.394 in. [10 mm] DD (1)
- 0.430 in. [10.9 mm] Round (1)
- 0.438 in. [11.1 mm] Round (1)
- 0.500 in. [12.7 mm] (1/2) Hex (7)
- 0.500 in. [12.7 mm] (1/2) Round (8)
- 0.580 in. [14.7 mm] Round (1)
- 0.600 in. [15.2 mm] Round (1)
- 0.625 in. [15.9 mm] (5/8) Round (1)
- 0.875 in. [22.3 mm] (7/8) Round (1)
- 0.875 in. [25.4 mm] (7/8) Bearing Bore (1)
- 1.125 in. [28.6 mm] (1-1/8) Bearing Bore (8)
- 1.510 in. [38.4 mm] Round (1)
- C24T Servo Spline (2)
- Falcon Spline (1)
Head
Material
Motor Input
Pitch
Teeth
- 04 (1)
- 10 (2)
- 100 (2)
- 104 (1)
- 105 (2)
- 106 (1)
- 107 (2)
- 11 (2)
- 110 (2)
- 115 (2)
- 117 (2)
- 12 (5)
- 120 (2)
- 121 (1)
- 125 (2)
- 130 (2)
- 131 (1)
- 135 (2)
- 136 (1)
- 14 (3)
- 140 (2)
- 145 (2)
- 15 (2)
- 150 (2)
- 151 (2)
- 152 (1)
- 16 (3)
- 160 (2)
- 167 (1)
- 17 (4)
- 170 (2)
- 18 (2)
- 180 (2)
- 19 (4)
- 190 (2)
- 20 (2)
- 200 (2)
- 21 (1)
- 22 (3)
- 225 (2)
- 24 (4)
- 25 (1)
- 250 (2)
- 28 (3)
- 29 (1)
- 30 (3)
- 32 (4)
- 34 (1)
- 35 (4)
- 36 (1)