NeveRest Classic 60 Gearmotor

$33.00 – $34.00

Select option to view product code

The NeveRest 60 is a gearmotor with an attached encoder. The output shaft geometry and the gearbox housing diameter is similar to what FTC teams are familiar with. The shaft is a 6 mm D and the gea...Read More

View Full Details

Product Overview

The NeveRest 60 is a gearmotor with an attached encoder. The output shaft geometry and the gearbox housing diameter is similar to what FTC teams are familiar with. The shaft is a 6 mm D and the gearbox housing is 37 mm diameter.

The power cable which feeds into the black encoder housing has two different options that are already crimped to the end of the cable. (select your needs above):
  1. NEW for 2020! JST-VH-2 connectors Option: this option plugs directly into the FIRST Tech Challenge REV Controller
  2. Anderson Powerpole 15A connectors Option

FIRST Legality:

  • According to the FIRST Tech Challenge Game Manual Part 1, Rule RE10, this is legal for the 2020-2021 FTC Game. 
  • According to the FIRST Robotics Challenge Game Manual, Rule R27, this is legal for the 2020-2021 FRC Game as it uses the NeveRest am-3104 motor.

Encoder:
There is an encoder mounted to the backside of this motor. It is a 7 pulses per revolution (ppr), hall effect encoder. Since the motor's gearbox has a 60:1 reduction, then the NeverRest 60 output shaft provides 420 ppr.

Encoder Cable Options:
NeveRest motors do not come with an encoder cable as we offer 3 cable options: 

am-3926a allows you to connect the encoder directly to the FIRST Tech Challenge REV Controller.
am-2992 has the 4 encoder pins joined in one housing using standard 0.1" spacing.
am-2993 allows you to break out the 4 pins separately if you need them in a different order.

Working with the Encoders: Performance Specs:
Time to Failure at Stall: 2 minutes, 54 seconds
Motor Case Temperature at Failure: 190 degrees F
If you need the output shaft to be a 1/2" Hex, check out the 6 mm D to 0.5 in. Hex-Shaft Adapter (am-3744a)

Specifications

  • Back Drive Force: 19.200 oz-in
  • Connector Type: JST-VH-2, Anderson Powerpoles
  • Free Current: 0.5 AMPs
  • Gauge: 18 AWG
  • Gear Material: Steel
  • Material: Steel with Plastic Encoder Housing
  • Maximum Diameter: 1.500 in. (38 mm)
  • Maximum Power: 14 Watts
  • No Load RPM: 105 RPM
  • Output Shaft Size: 0.240 in. (6 mm) D Shaft
  • Overall Length: 5.3 in.
  • Poles Per Magnet: 7
  • Ratio: 60:1
  • Shaft Hardness: 45-50 Rockwell C
  • Stall Current: 11.5 AMPs
  • Stall Torque: 525 oz-in
  • Ticks Per Revolution: 1680
  • Voltage: 12 Volts DC

Documents

Layout Print(s)
CAD File(s)
Don't see what you need?

Returns

Returns are not accepted for this product.

35 reviews

  1. star star star star star 5 out of 5 stars

    2018 FTC Purchases Western Hills High School

    I was very pleased with the quality and service. Items ordered were received expeditiously.

    MR from Fort Worth

  2. star star star star star 5 out of 5 stars

    Review

    5 Stars

    MB from Kapaa

  3. star star star star star 5 out of 5 stars

    "Review"

    "I have found that your products are generally quite satisfactory. I have found, however, that some of the sensors, the color sensor for instance, does not work as expected with the ftc example code. With help from your support staff, I have been able to sort that out, but with the huge number of ftc users, in my opinion, it would be worth the effort to sort that out before next season."

    CR from San Diego

  4. star star star star star 5 out of 5 stars

    Review

    5 Stars

    BS from Belmond

  5. star star star star star 5 out of 5 stars

    good quality!

    good quality!

    ML from Nanjing

  6. star star star star star 5 out of 5 stars

    Review

    5 Stars

    SS from Lacombe

  7. star star star star star 5 out of 5 stars

    Review

    5 Stars

    JJ from Round Rock

  8. star star star star empty_star 4 out of 5 stars

    Review

    4 Stars

    SN from Pune

  9. star star star empty_star empty_star 3 out of 5 stars

    NeveRest 60 Gearmotor (am-3103)

    Bought as a spare

    RP from Oskaloosa

  10. star star star star star 5 out of 5 stars

    NeveRest 60 - lifting strong

    We use our NeveRest 60 for our dual pinion lifter and it has worked like a champ! Our next step is to add the encoder wiring and incorporate that into our coding for the lifting arm..... I love the AndyMark instant confirmation of order, and this one shipped out in under 24 hours. Great updates throughout the ordering and shipment process!

    LP from Burnsville

  11. star star star star star 5 out of 5 stars

    "NeveRest 60 - lifting strong"

    "We use our NeveRest 60 for our dual pinion lifter and it has worked like a champ! Our next step is to add the encoder wiring and incorporate that into our coding for the lifting arm..... I love the AndyMark instant confirmation of order, and this one shipped out in under 24 hours. Great updates throughout the ordering and shipment process!"

    FT from Burnsville

  12. star star star star star 5 out of 5 stars

    Perfect

    Excellent product ,thank you AndyMark

    ME from 6 of October City

  13. star star star star star 5 out of 5 stars

    Zwow!!

    More than what we needed but a good motor with encoder! Why go 40 when you can go 60?!

    JL from Cedar Creek

  14. star star star star empty_star 4 out of 5 stars

    Good motor

    We broke gears. Had to buy new ones.

    MH from Dorr

  15. star star star star star 5 out of 5 stars

    Gearmotors

    AndyMark motors reliably spin, continuously.

    DC from SAN ANTONIO

  16. star star star star star 5 out of 5 stars

    Review

    5 Stars

    AS from Queen Creek

  17. star star star star star 5 out of 5 stars

    Review

    5 Stars

    KG from Jacksonville

  18. star star star star star 5 out of 5 stars

    Outstanding

    Items were shipped promptly and they perform as described. Very happy.

    GF from St. Thomas

  19. star star star star star 5 out of 5 stars

    Great service, parts and timely shipment

    I have ordered several parts and field equipment from AndyMark and have never been disappointed. Thank you for your excellence in both products and service. I have called in several times and every time I have experienced a nice, knowledgeable and helpful person. Thank you for helping our high schoolers experience the fun of robotics.

    JD from Parker

  20. star star star star star 5 out of 5 stars

    "Great service, parts and timely shipment"

    "I have ordered several parts and field equipment from AndyMark and have never been disappointed. Thank you for your excellence in both products and service. I have called in several times and every time I have experienced a nice, knowledgeable and helpful person. Thank you for helping our high schoolers experience the fun of robotics."

    JD from Parker

  21. star star star star star 5 out of 5 stars

    "Review"

    "5 stars"

    CN from Victoria

  22. star star star star star 5 out of 5 stars

    Quick response

    These motors worked very well with no problems! We could do with the same two motors to hang our 45 lb robot. Our team was pretty impressed by the prompt replacement for the faulty motor.

    SS from Morris Plains

  23. star star star star star 5 out of 5 stars

    "Customer Service Needs a Raise"

    "I called to change my shipping address. Took 3 minutes and it was solved flawlessly. The guy on the phone stayed calm and I never questioned his competence. Thank you for hiring him. ~Pat (Going to be a return customer)"

    PM from canton

  24. star star star star star 5 out of 5 stars

    Review

    5 Stars

    PA from Plainview

  25. star star star star star 5 out of 5 stars

    NeveRest 60 motor

    Very powerful motor that we use to hang our robot. One of these motors will lift a 45# robot in under 30 seconds. Now that is lifting story.

    JL from Brandon

  26. star star star empty_star empty_star 3 out of 5 stars

    "good motor"

    "Bought two. one had a connection that seemed loose, but operated fine."

    JC from Newport News

  27. star star star star empty_star 4 out of 5 stars

    good

    Andymark parts are good, but shipping options can be improved. We need to see more economical shipping options like competitors.

    AP from Morris Plains

  28. star star star star star 5 out of 5 stars

    Great motor

    5 Stars

    MD from Chesterfield

  29. star star star star star 5 out of 5 stars

    Love it!

    Great torque, nice motor, and excellent service!

    MM from Warren

  30. star star star star star 5 out of 5 stars

    Awesome

    Just what we needed for our robot and just as described!

    KB from Flower Mound

  31. star star star star star 5 out of 5 stars

    "AWESOME!"

    "We love these motors. Awesome having the extra toque. Works great as a winch motor."

    MR from Chandler

  32. star star star star star 5 out of 5 stars

    Review

    5 Stars

    CB from Vicksburg

  33. star star star star star 5 out of 5 stars

    Review

    5 Stars

    MW from Tempe

  34. star star star star empty_star 4 out of 5 stars

    Review

    4 Stars

    IH from Oxford

  35. star star star empty_star empty_star 3 out of 5 stars

    Review

    3 Stars

    JC from Edison

Top of Page