6 in. DuraOmni Wheel

am-3154

$37.50

This Heavy Duty DURAble omni wheel is a vast improvement over our older 6" omni wheels and other wheels on the market. The body has been totally redesigned with durability and mobility in mind. The...Read More

View Full Details

Product Overview

This Heavy Duty DURAble omni wheel is a vast improvement over our older 6" omni wheels and other wheels on the market. The body has been totally redesigned with durability and mobility in mind. The design intent is to provide a smooth roll along with the ability to handle impacts very well.

The body is made from black polycarbonate, while the rollers are each molded with a nylon core and TPU tread. These rollers spin smoothly on a captured dowel pin.


Usage With Axle and Hub:

  • If you wish to drive this wheel with an axle and hub, you can pick your hub by fitting any of the AndyMark hubs to this wheel. Hubs are not included with this wheel. If this is your choice, then no bearing is needed. To install a hub onto this wheel, use #10-24x3/4 thread forming screws.

Usage With Sprockets and Bearings:

  • If you wish to drive this wheel with a sprocket, then the sprocket needs to be attached to the side of the wheel with #10-24x3/4 thread forming screws. You will also need to press ball bearings into the wheel so that it may spin on a shaft or bolt. The ball bearing must have a 1.125 in. od. For a 1/2 in. shafts, use am-0181. For a 3/8 in. shafts use am-0209.

Specifications

  • Bolt Pattern: 6 holes (0.157 in.) on a 1.875 in. bolt circle
  • Bore: 1.125 in. diameter x 0.36 in. deep with a 0.96 in. diameter thru hole
  • Diameter: 6 in.
  • Load Capacity: 120 lbs
  • Material: Gray TPU rubber (roller material), Black Polycarbonate (Body material), White Nylon (Roller material, inside)
  • Product Lifecycle: Other options available, <a href='/products/duraomni-wheel?sku=am-3154'>see this product and other options here.</a>
  • Roller Axle: 1/8 in. diameter steel dowel pin
  • Roller Durometer: 80A
  • Rollers: 10
  • Weight: 0.99 lbs
  • Width Across Middle: 2 in.

Returns

Returns are accepted within 30 days of purchase.
View our return policy here.

Recommendations

NI roboRIO 2.0

am-3000a

$485.00

SDS MK4i Swerve Modules

$365.00 – $635.00

7 reviews

  1. star star star star star 5 out of 5 stars

    Smooth but...

    This wheel rolls nicely in both directions. It is however quite a bit wider than standard drive base wheels. If installing these on a standard drive base they just barely fit and you will need to shorten the nylon bushings to make room.

    GV from EXPORT

    Verified Purchaser

  2. star star star star star 5 out of 5 stars

    DuraOmni Wheels

    During the short season we used the 6" DuraOmni on our West Coast Drive 8 wheel Chassis. We put them on the back to allow for smooth turning. During the 2021 season, the field obstacles are gone, so we are now running 6 of the 8 wheels as omnis. This has substantial improved turning performance. I would recommend these to eliminate turning difficulties.

    CS from LUDINGTON

    Verified Purchaser

  3. star star star star star 5 out of 5 stars

    delivery was quick and painless.Got the bear...

    delivery was quick and painless. Got the bearings it needs in the same shipment. Looks good.

    WA

    Verified Purchaser

  4. star star star star star 5 out of 5 stars

    Review

    5 Stars

    MC from Moorhead

  5. star star star star star 5 out of 5 stars

    "Review"

    "5 stars"

    BC from Dalton

  6. star star star star star 5 out of 5 stars

    Review

    5 Stars

    AR from Andover

  7. star star star star star 5 out of 5 stars

    Review

    5 Stars

    TF from Emmett

Top of Page