4 in. Performance Wheel with Nub Bore
The 4" Performance Wheel is a virtually indestructible wheel made out of solid 6061 aluminum. This competition-proven design has been used on FIRST Robotics Competition robots for many years, and i...Read More
0 reviewsWrite a Review
This wheel is designed to be driven by an AndyMark Nub and a 6 mm D shaft, using the Nub Bore. It also allows for other motion hardware that utilizes a 1.875" 6-hole bolt circle found in many AndyMark and competition robotics products. To mount one of these to the rear (flat) side, use a 250 Sprocket and Pulley Spacer. To mount one to the front, use a 550 Sprocket Spacer. This wheel does not include tread material, which is available separately to tailor this wheel's performance to your application.
Note: This wheel is designed to utilize a zip-tie to attach and tension the tread to the wheel. The method of attachment is similar to the previous version, except that the zip tie goes around the bolt instead of through the hole. A new guide on how to attach tread to this wheel is coming soon.
- Bolt Circle: 4x #6-32 clearance on 16 mm bolt circle, 6 threaded holes for #10-32 screws on a 1.875 in. diameter bolt circle
- Bore: Nub Bore
- Diameter: 4 in. (with tread)
- Material: 6061 Aluminum
- Tread Width: 1 in.
- Weight: 0.35 lbs