PG27 RS775-125 Motor with Encoder

am-3109

$22.00

$10.00

This motor is the same motor included in our PG27 Gearmotor, and is being sold with the intention of replacing the motor without having to purchase the gearbox as well. This motor comes with the pi...Read More

View Full Details

Product Overview

This motor is the same motor included in our PG27 Gearmotor, and is being sold with the intention of replacing the motor without having to purchase the gearbox as well. This motor comes with the pinion gear and encoder attached and also includes the 2 mounting screws.

The back shaft of this motor features our Hall Effect Encoder, which can be removed if your application needs the long back shaft.

This motor, without the encoder, is am-2766, and is similar to am-2194, (same motor slightly shorter shaft). Both of these base motors are called out in the FIRST Robotics Competition manual as being legal for use in 2022.  

Encoder Pinout:
  • Pin 1: 5V DC
  • Pin 2: Ground
  • Pin 3: Channel A Output
  • Pin 4: Channel B Output

Specifications

  • Back Shaft Diameter: 0.2 in.
  • Back Shaft Length: 0.45 in.
  • No Load RPM: 5700 RPM
  • Pulses Per Revolution: 7
  • Shaft Diameter: 0.125 in.
  • Stall Current: 15-20 AMPs
  • Stall Torque: 35 oz-in
  • Teeth: 11
  • Voltage: 12 Volts DC
  • Wattage: 44
  • Weight: 0.86 lbs.

Returns

Returns are accepted within 30 days of purchase.
View our return policy here.

Recommendations

2 reviews

  1. star star star star star 5 out of 5 stars

    Good Motor if Properly Matched to the Task

    This isn't the strongest motor available for FRC, but if you match the motor to the task, it will perform very well in it's power/load range. It worked well when paired with a PG71 gearbox for our Power Cube Dumper mechanism during the 2018 Power UP! competitions.

    BF from Duluth

  2. star star star star star 5 out of 5 stars

    "Good Motor if Properly Matched to the Task"

    "This isn't the strongest motor available for FRC, but if you match the motor to the task, it will perform very well in it's power/load range. It worked well when paired with a PG71 gearbox for our Power Cube Dumper mechanism during the 2018 Power UP! competitions."

    BF from Duluth

Top of Page