Valve, hand, 1/8 NPT, 1/4 push-in fitting
This is an inexpensive manual dump valve (aka: vent valve). One end is a 1/4" push-in-connector, the other end is a 1/8" NPT Thread. An easy turn knob allows for the air flow to be stopped.
- Depth: 0.72 in.
- Height: 1.6 in.
- Hex Width: 0.5 in.
- Material: Brass with nickel plating
- Operating Pressure: 0-150 psi
- Port(s): 0.25 in. push-in-connector
- Product Lifecycle: replaced by <a href='/products/ball-valve-1-4-in-npt-male-x-female-lever-handle-chrome-plated'>am-2023</a>
- Weight: 0.1 lbs
- Width: 2.39 in.
Returns are not accepted for this product.
Plastic feels very cheap. Will not use unless we REALLY nead the weight savings.
Valve, hand, 1/8 NPT, 1/4 push-in fitting (am-22
This is an inexpensive valve that works well but It is not a dump valve meaning it does not release the vacuum or pressure when closed.
Much lighter than the old brass relief valves.
"3-way not the way"
"I was fooled by this valve. Thinking it was a 2-way dump valve. In fact it is a 3-way valve with no connection on the exhaust port. It might be usefull to manually simulate a 3-way solenoid valve but I can't see a use for it on a robot. Need a true 2-way dump valve."