151 Tooth 5 mm 15 mm Wide Timing Gates Belt
This is a Gates HTD timing belt, manufacturer part number 755-5M-15 Usage: Axle Locations for AM14U Variations (.pdf)
Axle Locations for AM14U Variations (.pdf)
- Fiberglass Reinforced: Yes
- Pitch Length: 29.72 in. (755 mm)
- Product Lifecycle: Other options available, <a href='/products/15-mm-wide-5-mm-pitch-htd-timing-belts?sku=am-2706'>see this product and other options here.</a>
- Teeth: 151
- Tooth Profile: 5 mm pitch HTD
- Weight: 0.1 lbs
- Width: 15 mm
gates product was ok and as expected
In another order we purchased 2 supershifters (2 speed tramsmissions) they were not the same as one had 2 open sides, and that would alllow for dirt to enter, and greas to be slung out to the floor and into our BOT. Also the mounting holes for the CIM motors was too small for the sim end cap to enter for mounting. We had to dissasemble and bore the holes to fit. The cims measured to correct size. I had the same problem on another shifter at the begining of the season.
Good belts, got what I expected.
Belts for square chassis
The Gates belts are a high quality product. We had to order these parts as the square configuration is not completely supported in the KOP but should be.
By the time my school's finance people approved our PO, our order had totally changed. AndyMark rolled with it, making the changes instantaneously, and shipping to us super quick. Thanks!