TileRunner

$399.00 – $825.00

This is a 6-wheel drive base designed especially for the FIRST Tech Challenge community. We took many lessons from building championship-winning drive systems and adapted it for a robust drive syst...Read More

Product Overview

This is a 6-wheel drive base designed especially for the FIRST Tech Challenge community. We took many lessons from building championship-winning drive systems and adapted it for a robust drive system that integrates well with FTC teams' existing stockpiles.

The foundation of this drive base is a set of 0.090 inch thick aluminum components that provide a sturdy structure to build on. All of the holes in the sheet metal are on a global 16mm pattern, which integrates nicely with many structure components already on the market for FIRST Tech Challenge teams. The included plastic bellypan increases the rigidity of the frame and provides ample mounting options for your electronics. The TileRunner features high traction 4" Stealth Wheels, NeveRest 40 motors and PicoBox Gearboxes with multiple gearing options. Strong 9mm HTD belts drive the outer wheels, while the center wheel on each side is direct-driven for a compact, failure-tolerant drive system. The new AndyMark Nub is used throughout the TileRunner, providing a robust D-bore interface that greatly improves torque transmission compared to standard set-screw hubs.

Note: This product ships as an unassembled kit of parts.

Gear Ratios:
The kit comes with 3 different gear ratio options, so that you can experiment and understand how changing the gear ratio affects the driving performance of the TileRunner.
  • 45 Tooth and 35 Tooth gear combination yields a 1:0.78 over drive
  • Two 40 Tooth gears yield a 1:1 ratio/li>
  • 35 Tooth and 45 Tooth gear combination yields a 1:1.28 reduction
Variations to Suit Your Needs:
The TileRunner has a huge variety of possible configurations. The Stealth wheels can be swapped with higher traction (softer) variants, the PicoBoxes can be mounted at either end instead of the standard location in the middle. The Peanut and Churro cross members can also be moved into a number of alternate locations to best suit your robot's needs. Upgrade kits are available to set up the chassis for running the 4 inch SD mecanum wheels, or a set of omni wheels to give the robot many potential driving modes.

To help robot builders achieve their goals and avoid unnecessary part, the TileRunner is available in several variations. These variations add and subtract parts from the standard TileRunner kit as follows:

  • TileRunner GTO (am-3437_gto): For increased maneuverability, this version substitutes NeveRest Orbital 20 gearmotors (am-3637) and black 4" Stealth Wheels (am-2648_Blk) with higher grip than stock and the proper mounting plate, PickBox GEO Plate (am-3476), for the Orbital Gearmotors
  • TileRunner BullDozer (am-3437_bd): When you want to push, pick this! NeveRest Classic 60 gearmotors (am-3103) provide maximum torque, while six of our softest compound blue 4" Stealth Wheels (am-2648_Blue) put that to the ground for maximum pushing force. Pushing hard will increase wear on these wheels, so have a spare set handy for competition time.
  • TileRunner SD Mecanum (am-3437_mec): Get set to strafe with four PicoBox Unos replacing the two PicoBox Duos of the standard TileRunner. You'll receive four 4" standard-duty mecanum wheels (am-2538) instead of Stealth Wheels, as well as all the spacers, shafts, and gears to get you up and running.
  • TileRunner HD Mecanum (am-3437_HDmec): Take your strafing to the next level with 4" HD Mecanum wheels (am-3919). Four PicoBox Unos replacing the two PicoBox Duos of the standard TileRunner, as well as all the spacers, shafts, and gears to get you up and running.
  • TileRunner Omni (am-3437_omni): 6WD with omniwheels at the corners is a popular choice among FIRST Tech Challenge teams. Instead of the standard Stealth Wheels, this variation includes two black 4" stealth wheels (am-2648_Blk), four 4" aluminum omniwheels (am-2948), and the necessary hardware.
  • TileRunner Hulk (am-3437_hulk): The TileRunner Hulk is your go-to for heavy robots! Six 4" Performance Wheels (am-3434) and a 10' roll of our Green Grippy Tread (am-2611) replace the Stealth Wheels and provide a very robust drive system.
  • TileRunner - No Wheels or Gearmotors (am-3297): Already stocked up on wheels and our NeveRest motors? No worries, this version omits them. You'll still receive the motion and structure components of the standard TileRunner.
  • TreadRunner (am-3437_TRD): Traverse any terrain with a tread equipped TileRunner. This robot drive chassis drives a pair of 2" wide timing belt treads to push, climb, and overcome obstacles in it's path. Like other standard TileRunners, it uses two PicoBox Duos along with sturdy aluminum sheet metal frame components. This version of the TileRunner retains the drop center performance boost by adding an idler pulley where the traditional center wheel goes. This way the TreadRunner turns on a dime and trucks in a straight line like no TileRunner kit before.
See the Upgrades page if you already have a TileRunner.


Shipping Box Size estimate: 12" x 19" x 3.25"
Weight (TileRunner, with wheels and gearmotors): ~ 11.5 lbs

TileRunner No Wheels no Gearmotors (am-3297):
TileRunner (am-3437) Includes above (am-3297) and:
GTO (am-3437_gto) Includes above (am-3297) and:
BullDozer (am-3437_bd) Includes above (am-3297) and:
Omni (am-3437_omni) Includes above (am-3297) and:
Hulk Includes above (am-3297) and:
TreadRunner Includes above (am-3297) and:
  • 2 - Treads (am-3963)
  • 6 - Pulleys (12 halves) (am-3967)
  • 2 - Tensioner Kits (am-3970h)
  • 6 - 6x4x8 Nylon Spacer (am-1289)
  • 24 - 6-32 x 1.000in Hex Head Cap Screws (am-1426)
  • 36 - 10-24 x 1.250 Thread Forming Screws (am-1266)
  • 1 - Letter O sized Drill bit (Clearance holes for 8mm parts) (am-3978)

SD Mecanum (am-3437_mec) Includes in entirety:

HD Mecanum (am-3437_HDmec) Includes the above from the SD kit with the following alternates:

  • 2 - 4" HD Mecanum Wheels, Right (am-3919R)
  • 2 - 4" HD Mecanum Wheels, Left (am-3919L)
  • 8 - 1/4" Aluminum Spacers (am-3424) 

Recommendations

$130.00 – $399.00

am-3392_Inside

$15.00

am-3437_gto

$569.00

am-3392_Outside

$14.00

am-3437

$549.00

10 reviews

  1. star star star star star 5.0 out of 5 stars

    Review

    Excellent service

  2. star star star star empty_star 4.0 out of 5 stars

    Review

    4 Stars

  3. star star star star star 5.0 out of 5 stars

    good quality!

    good quality!

  4. star star star star empty_star 4.0 out of 5 stars

    product eval

    The product is awesome, the instructions are not. After some trouble and a call we learned that they have been updated and MOST of the changes were located within the online instructions. We can take it apart and put it back together blindfolded at this point!

  5. star star star star star 5.0 out of 5 stars

    Review

    5 Stars

  6. star star star star empty_star 4.0 out of 5 stars

    Fast Service

    I'm feeling pretty lucky - we live in OH- so anything I order even over slow mail shows up in a day or 2. Ordered a Tile Runner - I wish it came with a few extra screws and such but overall I'm pleased.

  7. star star star star empty_star 4.0 out of 5 stars

    Review

    4 Stars

  8. star star star star star 5.0 out of 5 stars

    TileRunner

    Quick delivery!

  9. star star star star star 5.0 out of 5 stars

    TileRunner for rookie teams.

    TileRunner is a great base for rookie teams to start with, giving them an adaptable, reliable and quick drive base so they can concentrate on the control, electrical, programming and game piece manipulators.

  10. star star star star star 5.0 out of 5 stars

    Quick with Quality

    Thank you team for providing a better experience to my team

Top of Page