RS775-125 Motor, with Encoder, for PG27 Gearbox
This motor is the same motor included in our PG27 Gearmotor, and is being sold with the intention of replacing the motor without having to purchase the gearbox as well. This motor comes with the pi...Read More
The back shaft of this motor features our Hall Effect Encoder, which can be removed if your application needs the long back shaft. This is the same motor as am-2194, except it has a longer back shaft.
- Pin 1: 5V DC
- Pin 2: Ground
- Pin 3: Channel A Output
- Pin 4: Channel B Output
- Back Shaft Diameter: 0.2 in.
- Back Shaft Length: 0.45 in.
- No Load RPM: 5700 RPM
- Pulses Per Revolution: 7
- Shaft Diameter: 0.125 in.
- Stall Current: 22 AMPs
- Stall Torque: 35 oz-in
- Voltage: 5 Volts DC,12 Volts DC
- Weight: 0.86 lbs.
Good Motor if Properly Matched to the Task
This isn't the strongest motor available for FRC, but if you match the motor to the task, it will perform very well in it's power/load range. It worked well when paired with a PG71 gearbox for our Power Cube Dumper mechanism during the 2018 Power UP! competitions.