Omni Mixer for Cheap & Dirty RCU
The RobotLogic Omni mixer allows for simple RC-control of a three wheel Omni drive Robot. The Omni Mixer is plugged into a standard RC receiver using three input channels. 3 motor speed controllers...Read More
Product Overview
The RobotLogic Omni mixer allows for simple RC-control of a three wheel Omni drive Robot. The Omni Mixer is plugged into a standard RC receiver using three input channels. 3 motor speed controllers are then plugged into the omni mixer. The driver can use any combination of forward-reverse, left right and sideways translation commands to control the robot.
This product is specifically designed to work with our Cheap & Dirty Controls out of the box with no new reprogramming.
This RC mixer is designed for a three wheel omni drive robot or "Kiwi" drive. It will not work for 4 wheel Omni drive. This product interfaces with our Kiwi Drive Chassis and is included in the Cheap and Dirty Electronics for Kiwi Drive.
Features
This product is specifically designed to work with our Cheap & Dirty Controls out of the box with no new reprogramming.
This RC mixer is designed for a three wheel omni drive robot or "Kiwi" drive. It will not work for 4 wheel Omni drive. This product interfaces with our Kiwi Drive Chassis and is included in the Cheap and Dirty Electronics for Kiwi Drive.
Features
- 3 wheel omni mixing with translation and rotation input
- Failsafe on signal loss
- No need for line boosters when used with IFI speed controllers
- Signal Boosting to each PWM output
Specifications
- Product Lifecycle: available at <a href='http://www.robotlogic.com/product_omx3.html' target='_blank'>Robot Logic</a>
Returns
Returns are not accepted for this product.
Recommendations
1 review
-
Works great!
We bought this unit because we wanted to replace a CRIO in our 2010 FRC robot which was omni wheel robot. This required no programming when used with the "cheap and dirty" unit.
