Nano Tube 31, Two 1/2 in. Key Shafts
Product Usage:All AndyMark gearboxes require grease for proper operation and long life. We suggest using our red tacky grease, am-2768. We also encourage that the user powers the gearbox continuous...Read More
Product Overview
Product Usage:
All AndyMark gearboxes require grease for proper operation and long life. We suggest using our red tacky grease, am-2768. We also encourage that the user powers the gearbox continuously for 30 minutes without grease to allow the gear teeth to wear in. While we do design with short run times in mind, this 'run in' period for smooth gearbox operation, is recommended. Once this is completed, thoroughly grease the gear teeth periodically to ensure smooth operation.
This 31 in.-long Nano Tube houses two complete gearboxes, each having the same gearing and shafts as the Nano with 500 Key Shaft. Nano Tube accepts two 2.5 in. CIM Motors. Hardware is included for attaching this motor.
This product is intended to be used as a complete drive module for the side of a 4-wheel-drive robot. A second tube is to be used on the opposite side of the robot in order to make the complete drive chassis. Version: 2-shaft, 500 Key
Weight: 4.8 lbs., not including motors or encoders
Optional Gear Ratios:
Weight Reductions with Optional Parts:
Aluminum Large Cluster Gear can replace the standard steel 50 Tooth Large Cluster Gear.
Aluminum Large Output Gear can replace the standard steel 50 Tooth Large Output Gear.
Optional Encoder:
An optional Encoder Package can be purchased and added to this Toughbox. If you already have a US Digital Encoder to fit this Toughbox, this Encoder Mount Pad will help you mount the encoder to the Toughbox. Here is a guide for encoder installation and alignment.
Aluminum Hex Output Shaft:
The Toughbox Nano Tube can use an optional Short 1/2 in. Hex Aluminum Output Shaft with Magnet for Toughbox® Series (am-am-0397a) as a separate purchase but a FR8ZZ-Hex bearing MUST also be ordered SEPARATELY to replace the FR8ZZ bearing supporting each output shaft.
Made in the USA:
Bearings and screws were not made in the USA. All other components were designed, manufactured and assembled in the United States of America.
All AndyMark gearboxes require grease for proper operation and long life. We suggest using our red tacky grease, am-2768. We also encourage that the user powers the gearbox continuously for 30 minutes without grease to allow the gear teeth to wear in. While we do design with short run times in mind, this 'run in' period for smooth gearbox operation, is recommended. Once this is completed, thoroughly grease the gear teeth periodically to ensure smooth operation.
This 31 in.-long Nano Tube houses two complete gearboxes, each having the same gearing and shafts as the Nano with 500 Key Shaft. Nano Tube accepts two 2.5 in. CIM Motors. Hardware is included for attaching this motor.
This product is intended to be used as a complete drive module for the side of a 4-wheel-drive robot. A second tube is to be used on the opposite side of the robot in order to make the complete drive chassis. Version: 2-shaft, 500 Key
Weight: 4.8 lbs., not including motors or encoders
Optional Gear Ratios:
| Ratio | CIM Gear | Lg. Cluster Gear | Sm. Cluster Gear | Lg. Output Gear |
| 10.71:1 | 14 tooth | 50 tooth | 16 tooth | 48 tooth |
| 8.45:1 | 14 tooth | 50 tooth | 19 tooth | 45 tooth |
| 5.95:1 | 14 tooth | 50 tooth | 24 tooth | 40 tooth |
Weight Reductions with Optional Parts:
Aluminum Large Cluster Gear can replace the standard steel 50 Tooth Large Cluster Gear.
Aluminum Large Output Gear can replace the standard steel 50 Tooth Large Output Gear.
Optional Encoder:
An optional Encoder Package can be purchased and added to this Toughbox. If you already have a US Digital Encoder to fit this Toughbox, this Encoder Mount Pad will help you mount the encoder to the Toughbox. Here is a guide for encoder installation and alignment.
Aluminum Hex Output Shaft:
The Toughbox Nano Tube can use an optional Short 1/2 in. Hex Aluminum Output Shaft with Magnet for Toughbox® Series (am-am-0397a) as a separate purchase but a FR8ZZ-Hex bearing MUST also be ordered SEPARATELY to replace the FR8ZZ bearing supporting each output shaft.
Made in the USA:
Bearings and screws were not made in the USA. All other components were designed, manufactured and assembled in the United States of America.
Specifications
- Input Gear: CIM Gear
- Large Cluster Gear: 50 tooth
- Large Output Gear: 50 tooth
- Material: 6061 Aluminum
- Output Shaft: 1/2 in. diameter
- Product Lifecycle: discontinued
- Small Cluster Gear: 14 tooth
- Weight: 5 lbs
Documents
Guide(s)
Don't see what you need?
Returns
Returns are not accepted for this product.
Recommendations
1 review
-
Review
cool part, but we won;t be using it this year after all.
