Hall Effect Sensor
$14.00
A better way to Hall Effect is here. Now you can easily see when the magnet is close to this hall effect sensor as there is a blue LED, on to know it's powered, that will turn off when the magnet i...Read More
0 reviews
Write a ReviewProduct Overview
A better way to Hall Effect is here. Now you can easily see when the magnet is close to this hall effect sensor as there is a blue LED, on to know it's powered, that will turn off when the magnet is near.
This Hall Effect is designed specifically for FRC use and is featured in the DART, Sensor Kit (am-3077) for the DART, 12" Actuator Kit (am-3072a) and DART, 6" Actuator Kit (am-3076a) being used as a limit switch during the actuators travel.
The sensor works with either pole of the magnet and reading the sensor is easy, 5v means component is safe to move 0v means the magnet is under it.
This hall effect sensor board has four mounting holes. You can use two for mounting and two for a cable tie to hold the connecting cable in place.
Features:
This hall effect sensor board has four mounting holes. You can use two for mounting and two for a cable tie to hold the connecting cable in place.
Accessory Option Also Includes:
- 1 - 3-wire PWM Extension Cable, 12" (am-0693)
- 1 - Redline Encoder Magnet (am-3751)
- 4 - 4-40 x 500 Socket Head Cap Screws (am-1136)
- 4 - 4-40 Nylock Nuts (am-1139)
Features:
- High Sensitivity
- Small Footprint
- Blue LED Indicator of Activity
- Designed for FRC use
- Length: 0.75"
- Width: 0.75"
- .119" holes 0.125" away from edges
- .0625" Thickness
Specifications
- Length: 0.75 in.
- Product Lifecycle: replaced by <a href='/products/hall-effect-sensor-b'>am-3313b</a>
- Thickness: 0.0625 in.
- Width: 0.75 in.
Documents
Guide(s)
Don't see what you need?
Returns
Returns are not accepted for this product.
Recommendations
