Battery Beak for FIRST Tech Challenge Batteries

am-3430

$119.00

This version of the Battery Beak is designed with FIRST Tech Challenge teams in mind. When you order this version, your Battery Beak will arrive configured for the 12V 3Ah NiMH batteries used in FI...Read More

View Full Details

Product Overview

This version of the Battery Beak is designed with FIRST Tech Challenge teams in mind. When you order this version, your Battery Beak will arrive configured for the 12V 3Ah NiMH batteries used in FIRST Tech Challenge. You will also receive the new SB-50A to Tamiya and PowerPole cable necessary to connect to your batteries, whether you left them stock or converted them to PowerPole connectors.

Note:Don't use both the Tamiya and PowerPole connectors at the same time. It will form a complete circuit, which could damage your batteries.

Included Hardware:
  • One - FIRST Tech Challenge Battery Configured Battery Beak (am-3427)
  • One - Tamiya/ Power Pole Adapter (am-2070a)

Specifications

  • Product Lifecycle: Other options available, <a href='/products/battery-beak-frc-ftc-usage?sku=am-3430'>see this product and other options here.</a>

Documents

Don't see what you need?

Returns

Returns are accepted within 30 days of purchase.
View our return policy here.

Recommendations

Battery Beak

$101.00 – $119.00

Battery Flag

am-0122

$1.50

4 Gauge Battery Cable

am-3777

$27.50

5 reviews

  1. star star star star star 5 out of 5 stars

    Knowledge is POWER

    It is good to know if your batteries are any good. This tool lets you know which batteries are good and which need to be replaced. It is quick and effective.

    RS from BOCA RATON

    Verified Purchaser

  2. star star star star star 5 out of 5 stars

    Quick and easy to use

    This battery tester is so easy to use. We have a "collection" of batteries but I never felt comforatable getting rid of batteries just because they were old. When they acted up, we jsut put atag on them, "Don't Use". With this tester it only takes seconds to test them after they come off the charger. The definative Good- Fair - Bad grade makes the decision to keep or get rid of batteries easy.

    JG from SAINT LOUIS

    Verified Purchaser

  3. star star star star star 5 out of 5 stars

    Essential Piece of Kit

    We use this for both FRC and FTC. Quick and easy way to keep up with battery charge and condition to avoid a robot dying mid-competition.

    JJ from Wilmington

    Verified Purchaser

  4. star star star star star 5 out of 5 stars

    Battery Beak FTC Teams 12693 & 12695

    The Battery Beak is easy to use and provides quick results. So far, we have only used the battery load test function. Page 6 of the manual was all that was needed to set up and test battery status. The Battery Beak identified batteries that appeared to be good but failed under load. Also discovered that after resting batteries for 24 hours following charging, some of our batteries were not reaching/holding 100% charge. With the Battery Beak, we can now go into competitions confident in our batteries.

    JC

    Verified Purchaser

  5. star star star star star 5 out of 5 stars

    Battery Beak for FIRST Tech Challenge Batteries

    Every FTC should be required to have at least one. We had battery issues last season and a team from Midland allowed us to use their tester and it saved the day. To put it short - get one. Terry Nelson Plainview HS Teams 8707, 9071, 10559, 11773, 12975, 14813

    JJ from Plainview

    Verified Purchaser

Top of Page