AndyMark 775a RedLine Motor with 16 Tooth 0.7 Module Pinion Gear Installed

am-3775a_16t

$27.00

This updated version of the AndyMark 775 RedLine Motor is an even faster and more powerful version of this popular 775-class motor platform. With a power rating of up to 363W, this motor is capable...Read More

0 reviews

Write a Review

Product Overview

This updated version of the AndyMark 775 RedLine Motor is an even faster and more powerful version of this popular 775-class motor platform. With a power rating of up to 363W, this motor is capable of delivering even more immense power in the same small lightweight package over the previous version. This ball-bearing supported, air cooled motor is best used in high-speed applications where the motor will not be stalled for long periods such as shooters, conveyors, and intake mechanisms. With sufficient care and attention to your application's traction limit, this motor can be effective in FRC drive applications as well.

This variation of the RedLine comes with a 16 tooth, 0.7 Module pinion (am-3784) already pressed on allowing this motor to be installed into either a 57 Sport or a Dual 775 Sport gearbox. Not only does this take the risk of damaging the motor during pinion installation out of your hands, it also means that this counts as a COTS part in FRC, and bringing these as spares to your competition won't count against your weight allowance for 2019. 

Useful Additional Parts:

Motor has the following information laser etched on the flux ring:
Manufacturer Part number: DF-30F-2003 
Logo: AndyMark Logo
AndyMark Part Number: am-3775a
Voltage: 12VDC
Date Code: YYWWD

Specifications

  • Bolt Pattern: 2 M4x0.7 Holes on a 29 mm diameter bolt circle
  • Bore: 0.19 in. Round
  • Diameter: 29 mm
  • Gear Length: 0.47 in.
  • Gear Material: Steel
  • Gear Weight: 0.16 lbs
  • Length: 3.598 in.
  • Maximum Power : 363 Watts
  • Module: 0.7
  • No Load Current: 3.8 AMPs
  • No Load Free Speed: 21020 RPM (+/- 10%)
  • Output Shaft Diameter: 5 mm
  • Output Shaft Length: 0.346 in.
  • Pitch Diameter: 0.44 in.
  • Pressure Angle: 20
  • Stall Current: 130 AMPs
  • Stall Torque: 0.7 N-m (6.2 in-lbs) (+/- 10%)
  • Teeth: 16
  • Voltage: 12 Volts DC
  • Weight: 0.9 lbs

Top of Page