6 in. Performance Wheel XL 0.50 in. Hex Bore
The 6 in. Performance Wheel XL is a virtually indestructible wheel made out of solid 6061 aluminum. This competition-proven design has been used on FIRST Robotics Competition robots for many years....Read More
This wheel is designed to be driven by a 1/2 in. Hex shaft, but also allows for other motion hardware that utilizes a 1.875 in 6-hole bolt circle found in many AndyMark and competition robotics products. To mount one of these to the rear (flat) side, use a 250 Sprocket and Pulley Spacer. To mount one to the front, use a 550 Sprocket Spacer. This wheel does not include 1.47" wide tread material.
Note: This wheel is designed to utilize rivets to attach the tread to the wheel. AndyMark recommends steel 1/8" diameter rivets with a 0.251" - 0.312" grip range. The wheel has been manufactured with no holes on the rim, as it is intended to be a blank canvas for teams to install rivets freely.
- Bore: 0.50 in.
- Diameter: 5.67 in., 6.0 in. Nominal with Tread
- Finish: Tumbled
- Hole Pattern: Qty 6 0.159 in. holes on a 1.875 in. bolt circle tapped for 10-32 thread
- Hub Depth: 0.125 in.
- Hub Diameter: 0.75 in.
- Material: 6061-T6 Aluminum
- Weight: 0.84 lbs
- Width: 1.525 in. Lip to Lip, 1.625 in. Outside Lip to Outside Lip, 1.750 in. Overall
Not quite indestructable
These are strong but the rims dent going over the 1.25" steel bars in the 2020 game. I suggest you rivet tread near the spokes.