12 Tooth 5 mm HTD 8 mm Bore Pulley With Flanges
This is a 12 tooth 5 mm HTD pulley with an 8 mm bore and 2 mm keyway perfect for interfacing with a CIM motor shaft. It fits belts that are 9 mm wide.
Product Overview
Specifications
- Product Lifecycle: discontinued
- Teeth: 12
Documents
Returns
Returns are not accepted for this product.
Recommendations
3 reviews
-
Bore dia. is not 8mm
These worked but I had to drill the bore out to fit over 8mm motor shafts. This left the bores a little wonky, plus the teeth got chewed up a little trying to hold them with channel locks while I drilled. I expected better for $14 bucks Chuck
-
Needed to press them on.
These are nice pulleys. They're a standard sized pulley that have been bored out to 8mm and a 2mm keyway added using a broach. The set screw hole is non functional. I used these on a set of Neo motors and the bore was undersized enough that I had to press them on.
-
It's a great quality item! Helps out reduce wei...
It's a great quality item! Helps out reduce weight on your robot and keep a good performance on it!
