1/2 in. Hex Broach
Here is a 1/2" high strength steel Hexagon Broach, push type, for use with arbor or hydraulic press. This converts a round hole into a hex, in just one pass. The length of cut based on mild steel. ...Read More
This item is currently out of stock
Be of the first to know when this item becomes available
Sign up for a notification when available
If your robot designs are using more and more hex products, you may as well have a broach!
- Body Diameter: 1/2
- Broach Length: 11-7/8
- Material: HSS (high speed tool steel)
- Maximum Length of Cut (inch): 1-3/8
- Minimum Length of Cut: 1/2
- Overall Length: 11-7/8
- Pilot Hole Diameter: 1/2
- Pitch: 9/32
- Shape: Hex
- Tolerance: +/- .0005-.001
So much easier!!
With an inexpensive hydraulic press (Harbor freight) (Arbor press wasn't long enough) this changed how we did a lot. Now any sprocket or gear can be cut with a 1/2 inch hex center in 3 minutes including set up. Additionally custom parts can be reamed , aluminum or steel cut easily. While its pricey it saved us several times when we needed to use a different ration sprocket but didn't have it available in 1/2 hex bore. This is my new MUST HAVE
I assumed it would fit our arbor press. I guess I don't see anything describing its size on the page.
They work just like they should.