Home > Gearboxes > BaneBots >

BaneBots BB220 Encoder Block with Encoder (am-2885)
BaneBots BB220 Encoder Block with Encoder (am-2885)
Price: $80.00

Stock Status:(Out of Stock)

Info Downloads
Product Overview:
This encoder block attaches to a BaneBots 220 Gearbox to provide feedback to the robot about the shaft location.

  • Weight: 0.84 pounds
  • Material: Aluminum
Quadrature Encoder Specifications:
  • Us Digital EM1
  • 1024 counts per revolution
  • Quadrature Encoder
  • Non Indexed (no zero point)
  • US Digital Details
Included Items:
  • 1 - Housing with Bearing
  • 2 - Thrust Bearings
  • 1 - Encoder Wheel
  • 1 - Encoder
  • 1 - Collar Clamp
  • 0.005" shims
  • Washers
  • Mounting Screws

Average Customer Review: 4 of 5 Total Reviews: 1 Write your own review!

  0 of 0 people found the following review helpful:
wrong encoder wheel May 17, 2016
Reviewer: Dustin Maki from Rossville, TN United States  
My unit arrived with the encoder wheel in the picture, a  DISK2 http://www.usdigital.com/products/encoders/incremental/rotary/disks/DISK-2
That disk does not match the CAD file and cannot be assembled into a working unit with the parts provided.  Upon request, AndyMark quickly sent me the correct HUBDISK2.  http://www.usdigital.com/products/encoders/incremental/rotary/disks/hubdisk-2
Note: HUBDISK2 requires a .050" hex key(not provided) which can be hard to find locally.
Plan the assembly carefully and watch the encoder clearance.  It mounts upside down compared to USDiugital's documents.  The shaft clamp and encoder wheel have to be attached to shaft outside the housing, then have housing slipped over them, then have the encoder screwed down(need clearance for screwdriver).  An alternative if you do not have the required clearance is to drill hex key access holes in the housing.

Was this review helpful to you?

Browse products in the same categories:

Gearboxes > BaneBots
Browse ALL Products
Quantity Discounts