This novel style of collar clamp is split into two pieces so
that it can be attached without removing any shafts. The bore is a 1/2"
hex. The flats on the perimeter allow
for the collar clamp to be held in position or turned for better
This clamp has been designed and fabricated by BaneBots, and proudly sold through AndyMark.
Plastic spacers are included with this clamp, positioned between the two halves. These are to be removed before usage.
- Material: Aluminum
- Bore: hex hole, 1/2 inch
- Outside Diameter: 0.94 inch
- Thickness: 0.375 inch
- Width Across Flats: 7/8 inch
- Weight: 0.020 pound
- Clamping Screws: #6-32 x 1/2" long (qty. 2)