Home > Browse ALL Products > Shafts >

Long 1/2 in. Keyed Steel Output Shaft with Magnet for Toughbox Series (am-0211a)
Long 1/2 in. Keyed Steel Output Shaft with Magnet for Toughbox Series (am-0211a)
Price: $27.00

Stock Status: In Stock

Info Downloads
Product Overview:
This is an optional long steel output shaft for the Toughbox>® series gearboxes. This shaft includes a pre-installed magnet designed specifically with the E4T OEM Miniature Optical Encoder (am-3132) and SRX Magnetic Encoder (am-3445) encoder in mind. This shaft has replaced am-0211.

If using this shaft with the SRX Magnetic Encoder (am-3445), the SRX Magnetic Encoder Mounting Hardware Kit (am-3565) will be needed. The hardware allows for proper spacing of the encoder from the shaft magnet on Toughbox® Series Gearboxes and the EVO Shifter.

  • Material: 4140 Steel
  • Hex Portion Flat to Flat: 0.5"
  • Diameter of Large End: 0.49"
  • Diameter of Small End: 0.37"
  • Diameter of Magnet: 0.24"
  • Overall Length: 7.14"
  • 1/2" Round Portion Length: 5.3"
  • Keyway Length:
  • Keyway Width:
  • Thread: 1/4-20 Tapped 0.50 in. Deep
  • Weight: 0.34 Lbs

Average Customer Review: 1 of 5 Total Reviews: 1 Write your own review!

  0 of 0 people found the following review helpful:
Long shafts but different lengths February 26, 2018
Reviewer: Deborah Heyes from Owings, MD United States  
We were disappointed that we ordered several of these and their lengths differed by as much as half an inch.  This makes mounting encoders more difficult than it should be.

(AndyMark response:  Thank you for this review.  We erroneously shipped out shafts with magnets protruding at inconsistent lengths.  This issue is under control now.)

Was this review helpful to you?

Browse products in the same categories:

Browse ALL Products > Shafts
Gearboxes > Gearbox Parts > Toughbox® Parts
Browse ALL Products