Home > Extrusion and Structure >

2 x 1 Walnut Extrusion
2 x 1 Walnut Extrusion
Alternative Views:

Starting At: $17.00


Info Downloads
Product Overview:
Walnut Extrusion is the latest iteration of the nut-themed structural extrusion line. It follows the design standards of Peanut Extrusion and expands them to a 2x1 profile.

Walnut is an easy to use structural extrusion perfect for building strong, 90 degree joints without gussets. The profile has an end profile of 6 holes for 1/4-20 thread-forming screws on a 5/8 in. square grid pattern. The added rib supports are positioned to flank the pass-through bolts that thread into the adjoining extrusion. These ribs provide extra strength and prevent the side walls of the Walnut from being crushed by over tightening these bolts.

  • Wall Thickness: 0.063 in.
  • Width: 1 in.
  • Height: 2 in.
  • Length: Selectable Above
  • Hole Size:1/4-20 Thread-Forming Screw
  • Hole Spacing: 5/8 in. Equally spaced in an X-Y grid
  • Material: 6005A-T61 Aluminum
  • Weight Per Foot: 0.667 Pounds

Tell us what you think! Be the first to write a review

Browse products in the same categories:

Extrusion and Structure
Drive Chassis Bases > C-Base Frame Parts & Accessories
Drive Chassis Bases > Drive Chassis Parts
Browse ALL Products