To celebrate our 20th anniversary use code: 20AMSALE on select products now through May 31st, 2024!
Summer Hours: Mon. - Thurs. 8:00 AM - 5:00 PM, CLOSED FRIDAYS through 8/2/24.
To celebrate our 20th anniversary use code: 20AMSALE on select products now through May 31st, 2024!
Summer Hours: Mon. - Thurs. 8:00 AM - 5:00 PM, CLOSED FRIDAYS through 8/2/24.
This hub fits all AndyMark wheels, sprockets, and other items with the 1.1875 in. standard bolt circle, but will NOT fit inside the pocket of the 42T Pulley.Note: The current batch of hubs have an ...Read More
Note:
The current batch of hubs have an unused keyway, and also do NOT have the hex timed to the bolt pattern.
Returns are not accepted for this product.
Works perfectly to turn Structo Artcraft hex beam into a traditional beam.
This hub is very shinny and made out of metal. We will be buying many more to use on stuff we make.
5 Stars
5 Stars
4 Stars
5 Stars
5 Stars
5 Stars
The hub worked perfectly.
The product is good and required to use hex shaft. The product would be more useable with (1) or (2) set screws. This would eliminate the need to locking collars each time you used this.
4 Stars
Shipping was a little later then expected
Evrything fine as usual.
5 Stars
Exactly as advertised. This is a very versatile part and being used in my design to mount a crank that powers the mechanism.
5 Stars
5 Stars
5 Stars
5 Stars
Much better fit and quality than previous years.
4 Stars
Great quality product at a reasonable price. I only wish that the mounting holes would line up with the central hex when two hubs are joined back to back.
Amazing service! Your techs bent over backwards to help me get what I needed. Can't thank you all enough!
"5 stars"
We ordered 8 of these hex hubs which is not cheap as it will run you about $90 and none of the holes aligned. 0 of the eight hubs matched. We then gave them another chance and they sent us 8 more and once again the same problem even after we told them our problem. I would not suggest buying this product if you need the holes on the hub to align. (AndyMark response: This is not a design issue, it is a quality control issue. We have been selling these for many years, with assurance that the holes and hex were keyed and aligned. They are designed to be this way. However, we did have a recent batch of hubs which did not follow this standard, and we let these parts into fulfilled orders. We are sorry for this mistake. We are sending new hubs to this customer.)
5 Stars
5 Stars
Great service fast turnaround
This was our first year using hex hubs, and they were great! Practically our whole mech subteam was rookies, and hex hubs and shafts made them look better than our veterans the year before!
Item packed shipped in good condition and product is exactly as described
Nothing terribly exciting about this hub, but it fits a lot of wheels, and when used with hex shaft (of course) is a lot easier than round+keys
5 Stars
5 Stars
Just what I needed.
5 Stars
If you use these, order twice what you need plus 1 because the holes don't line up with the hex shaft in the same way on all of them. On some of ours, the holes line up with a vertex on the hex hole, on some, the holes line up with the flat side of the hex hole. Sad. (AndyMark Response: This issue should now be fixed, if you find this part to not fit a 1/2" Hex Shaft, please let us know at sales@andymark.com so we can fix this issue)
5 Stars
4 Stars
5 Stars
It's a hub for the modulux. It works.
4 Stars
"OK"
5 Stars
Great bearings run true! lower price makes the budget go a lot further
(haven't used it yet, but the service was awesome!)
5 Stars
FRC3548 is using this for 2012
5 Stars
5 Stars
Nice quality and fit