Home > Wheels > Rubber Treaded Wheels >

HiGrip Wheels
HiGrip Wheels
 
Alternative Views:


Price: $8.00



HiGrip Diameter*:


HiGrip Durometer*:


Qty:  
Info Downloads
 
Product Overview:
HiGrip wheels provide superior traction for robot movement. HiGrip wheels feature an aggressive tread pattern providing maximum transfer of gearbox power to the ground. A robust polycarbonate core means these wheels are up to the challenge for high impact and speed applications. Varying durometers mean you can choose just how grippy these wheels can be. White or 80A durometer HiGrip wheels have a long life and provide good traction. Black or 60A durometer HiGrip wheels have an intermediate life and higher grip than white. Blue or 60A durometer HiGrip wheels provide the most traction and will wear quickly as a result. The bolt pattern and bore of these wheels allow for convenient bearing placement and easy attachment to other motion parts such as sprockets and pulleys.

Product Usage:
Many thread locking materials are not compatible with polycarbonate and can eat away at the plastic. Be sure to check which adhesives are okay to use with this product. This link will allow you to check which materials are okay to use with what adhesives, http://bit.ly/loctitematerialcheck

Specifications:
  • Diameter: 4" or 6"
  • Body Material: Polycarbonate
  • Tread Material: Thermoplastic Polyurethane
  • Durometer: 80A (Grey), 60A (Black), 50A (Blue)
  • Bore: 0.95", with bearing pockets of 1.124" diameter x 0.25" deep on both sides
  • Bolt Circle: Six holes (0.157 in. diameter) on a 1.875" diameter bolt circle
  • 80A Carpet CoF: 0.95-1.0 Static
  • 60A Carpet CoF: 0.77 Static
  • 50A Carpet CoF: 0.97 Static
  • 4" Wheel Load Capacity: 100 Pounds
  • 6" Wheel Load Capacity: 90 Pounds
  • 4" Wheel Weight: 0.31 - 0.35 Pounds
  • 6" Wheel Weight: 0.47 - 0.52 Pounds
Usage:
Use #10-24x3/4 thread forming screws to attach sprockets or hubs to this wheel. Many thread locking materials are not compatible with polycarbonate and can eat away at the plastic. Be sure to check which adhesives are okay to use with this product. This link will allow you to check which materials are okay to use with what adhesives, http://bit.ly/loctitematerialcheck

With Axle and Hub:
  • If you wish to drive this wheel with an Axle and Hub, you can pick your hub by fitting any of the AndyMark hubs (not included) to this wheel. If this is your choice, then no bearing is needed. Use #10-24x3/4 thread forming screws to fasten a hub to this wheel.
With Sprocket:
  • If you wish to drive this wheel with a sprocket, then the sprocket needs to be attached to the side of the wheel, and two ball bearings need to be pressed into the wheel (one on each side). The ball bearing must have a 1.125" od. For a 1/2" id, use am-0181 or am-0029. For a 3/8" id, use am-0209. Use #10-24x3/4 thread forming screws to fasten the sprocket to the wheel.
With Bearings:
  • To press bearings into this wheel (for a free spinning wheel or for use with a sprocket), two ball bearings need to be pressed into the wheel (one on each side). The ball bearing must have a 1.125" od. For a 1/2" id, use am-0181 or am-0029. For a 3/8" id, use am-0209.


Wheel Lifespan Demonstration

Average Customer Review: 5 of 5 Total Reviews: 18 Write your own review!

  0 of 0 people found the following review helpful:
 
Great Quality August 16, 2018
Reviewer: Anonymous Person from CA United States  
These high impact wheels were just what a needed. Great looking, sturdy, and roll smoothly

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
June 14, 2018
Reviewer: Dan Phelps from Fishers, IN United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Request for technical support February 26, 2018
Reviewer: Stephen Brown from MATHEWS, VA United States  
The reply was accurate  and prompt.
Thank you

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
February 23, 2018
Reviewer: Anonymous Person from Dalton, GA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
February 16, 2018
Reviewer: Kevin Keller from Saugatuck, MI United States  
Great service, very helpful

Was this review helpful to you?

View All Customer Reviews

Browse products in the same categories:

Wheels > Rubber Treaded Wheels
Browse ALL Products