Home > Wheels >

4 in. Performance Wheel with Nub Bore (am-3612)
4 in. Performance Wheel with Nub Bore (am-3612)
Price: $28.00

Stock Status: In Stock

Info Downloads
Product Overview:
The 4" Performance Wheel is a virtually indestructible wheel made out of solid 6061 aluminum. This competition-proven design has been used on FIRST Robotics Competition robots for many years, and is now available in a version friendly to FIRST Tech Challenge robots. This new iteration of the wheel has been designed to keep costs down, as it is made from a custom extrusion instead of being fully machined from billet in past versions of this wheel. This wheel can take anything an FRC or FTC robot can throw at it, and much more.

This wheel is designed to be driven by an AndyMark Nub and a 6mm D shaft, but also allows for other motion hardware that utilizes a 1.875" 6-hole bolt circle found in many AndyMark and competition robotics products. To mount one of these to the rear (flat) side, use a 250 Sprocket and Pulley Spacer. To mount one to the front, use a 550 Sprocket Spacer. This wheel does not include tread material, which is available separately to tailor this wheel's performance to your application.

Note: This wheel is designed to utilize a zip-tie to attach and tension the tread to the wheel. While the method is similar to the previous version of this wheel (am-3434) a new guide on how to attach tread to this wheel is coming soon.

  • Material: 6061 Aluminum
  • Weight: 0.35 lbs
  • Diameter: 4 in. (with tread)
  • Tread Width: 1 in.
  • Bore: 8mm
  • Hub Mounting Holes: 4X #6-32 clearance on 16mm bolt circle, 6 threaded holes for #10-32 screws on a 1.875" diameter bolt circle

Tell us what you think! Be the first to write a review

Browse products in the same categories:

Wheels > Performance Wheels
FIRST > FIRST Tech Challenge > FTC Robot Parts
Browse ALL Products
New Products