Home > Wheels >

4 in. Performance Wheel with 1.125 in. Bearing Bore (am-3611)
4 in. Performance Wheel with 1.125 in. Bearing Bore (am-3611)
Price: $25.00

Stock Status: In Stock

Info Downloads
Product Overview:
The 4 in. Performance Wheel is a virtually indestructible wheel made out of solid 6061 aluminum. This competition-proven design has been used on FIRST Robotics Competition robots for many years. This new iteration of the wheel has been designed to keep costs down, as it is made from a custom extrusion instead of being fully machined from billet. This wheel can take anything an FRC robot can throw at it, and much more.

This wheel is designed to be supported by 1.125 in. OD (FR8) flanged bearings, but also allows for other motion hardware that utilizes a 1.875 in. 6-hole bolt circle found in many AndyMark and competition robotics products. To mount one of these to the rear (flat) side, use a 250 Sprocket and Pulley Spacer. To mount one to the front, use a 550 Sprocket Spacer. This wheel does not include tread material, which is available separately to tailor this wheel's performance to your application.

Note: This wheel is designed to utilize rivets to attach the tread to the wheel. AndyMark recommends steel 1/8" diameter rivets with a 0.251" - 0.312" grip range. The wheel has been manufactured with no holes on the rim, as it is intended to be a blank canvas for teams to install rivets freely.

  • Material: 6061 Aluminum
  • Weight: 0.30 lbs
  • Diameter: 4 in. (with tread)
  • Tread Width: 1 inch
  • Bore: Press for 1.125 in OD (FR8) Flanged Bearing
  • Hub Mounting Holes: 6 threaded holes for #10-32 screws on a 1.875" diameter bolt circle

Tell us what you think! Be the first to write a review

Browse products in the same categories:

Wheels > Performance Wheels
FIRST > FIRST Tech Challenge > FTC Robot Parts
Browse ALL Products
New Products