Home > Extrusion and Structure > REV Extrusion Building System >

REV, 15mm Linear Motion Kit (am-3246)

Not all Parts Shown
 
Price: $20.00
Estimated Back In Stock on: Nov 03, 2017

Stock Status:(Out of Stock)
Qty:

Info Downloads
 
Product Overview:
This linear motion kit is used with the REV 15mm Extrusion System. This kit can be configured in many different ways, but the most common allows for teams to build simple elevators and lifts for their robot. When building light duty lifts, the kit has enough parts for 4 single extrusion stages. When building heavy duty lifts (dual post) the kit has enough parts for 1 complete stage.

Individual Components within Kit:
  • 8 – M3 x 8mm low profile socket screws (used with double slide)
  • 8 – M3 hex nuts (used with double slide)
  • 8 – M3 x 12mm low profile socket screws (used with single slide)
  • 8 – M3 x 12mm hex head cap screws (used with single slide)
  • 16 – M3 lock nuts (used with single slide)

Average Customer Review: 4.5 of 5 Total Reviews: 6 Write your own review!

  0 of 0 people found the following review helpful:
 
February 20, 2017
Reviewer: Steven Schultz from Lacombe, AB Canada  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great kit November 14, 2016
Reviewer: Tom Capon from FTC 7393  
The linear bearing pieces work great, with one caveat.  IIRC, after assembling the kit we got in 2015, the hex nuts and bolts protruded past the plastic bearing and scraped on the sliding aluminum piece.  This was easily corrected with a few minutes on the bench grinder, and the mechanism gave us no trouble for the rest of the season.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
November 14, 2016
Reviewer: Kathy Godsell from Crystal Lake, IL United States  
The new fasteners make the motion much smoother than the previous version

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
na November 14, 2016
Reviewer: Kelle George-Grizzell from Jacksonville, FL United States  
na

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good kit March 16, 2016
Reviewer: Anonymous Person from Woodinville, WA United States  
The kit works well. My students could have used a bit more help with ways to actuate the slides once they were built. Also, notes about drilling into the REV 15mm extrusion would be helpful for the group that I have on my team.

Was this review helpful to you?

View All Customer Reviews

Browse products in the same categories:

Extrusion and Structure > REV Extrusion Building System
Drive Chassis Bases > Drive Chassis Parts
Drive Chassis Bases > Mounting to Chassis Kits
FIRST > FIRST Tech Challenge > FTC Robot Parts
Browse ALL Products
New Products
FIRST > FIRST Tech Challenge
Extrusion and Structure