Home > Gearboxes > Gearbox Parts >

Window Motor Mount (am-2374)

 
Price: $9.00

Stock Status: In Stock
Qty:

Info Downloads
 
Product Overview:
This is a sheet metal bracket designed to securely mount the Window Motor used in FRC.

Specifications:
  • Material: 5052 Aluminum
  • Weight: 0.17 Lbs
  • Thickness: 0.125"
  • Width: 3.25"
  • Depth: 2.12"
  • Height: 3.35"


Average Customer Review: 4.5 of 5 Total Reviews: 5 Write your own review!

  0 of 0 people found the following review helpful:
 
February 6, 2014
Reviewer: Robert Bellini from Phoenixville, PA United States  


Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Good, but not perfect February 5, 2014
Reviewer: Anonymous Person  
This mounting bracket does work reasonably well to mount a window motor.  However, there is interference with raised areas near the motor body that prevent it seating flat unless you cut/file away part of the bracket or add sims.

The mounting holes pilot neatly with the short mounting posts on the motor, but because the holes are very large diameter, you will need to provide your own oversized washers - it would have been better if AndyMark included suitable mounting hardware.

Also, the large hole at the end of the bracket is too small for the plastic hub that mates with this motor (fc14-135) to fit through, so it just rides on the surface of the bracket adding friction.  Since the outer-most two inches of the bracket don't even touch the motor, we cut it off so the hub could mate deeper into the splines.

It is definitely working for us, and it was way easier than machining our own, but be prepared to modify it a bit to get it to fit the way you need it to.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
q February 4, 2014
Reviewer: Tom Karns from Dublin, OH United States  
OK

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Thank you for introducing these brackets December 11, 2013
Reviewer: Michael Guthrie from Battle Creek, MI United States  
Our team has struggled with various ways to mount the window motors.  No one on our team thought to use the center hub and only one mounting bolt!  We always struggled with the staggered mounting holes when designing our own brackets.  Thanks Andymark.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Denso Window mount works like a champ March 28, 2013
Reviewer: Marc Center from Royal Oak, MI United States  
Denso Window mount works like a champ

Was this review helpful to you?


Browse products in the same categories:

Gearboxes > Gearbox Parts
Gearboxes > Gearbox Mounting & Kits
Gearboxes > Gearbox Plates & Housings
Browse ALL Products