Home > Sprockets and Chain >

S25-16HA-394K Sprocket, 25 Series, 16 tooth, 10mm Key Bore (am-2182)
S25-16HA-394K Sprocket, 25 Series, 16 tooth, 10mm Key Bore (am-2182)
 
Price: $11.00
Sale Price: $9.35

Stock Status:(Out of Stock)
Qty:

Info Downloads
 
This product, along with the rest of our 10mm key products has been obsolete. If you wish to still use your 10mm shaft gearboxes we recommend using the brass 1/2" shaft adapter (am-0996) with our 1/2" round bore products.

Product Overview:
S25-16HA-394K, 7075 Aluminum Sprocket, 25 Series, 16 tooth, 10mm diameter bore with 4mm keyway. This sprocket fits nicely on the PG Series gearboxes.

Specifications:
  • Sprocket Material: 7075 aluminum
  • Outside diameter: 1.407 inch
  • Pitch diameter: 1.29 inch
  • Weight: 0.026 pound
  • Bore: 10mm (0.393") dia with 4mm (0.157") keyway
  • Sprocket width: 0.118 inch
  • Overall hub and sprocket width: 0.405 inch

Average Customer Review: 4.5 of 5 Total Reviews: 9 Write your own review!

  0 of 0 people found the following review helpful:
 
A perfectly fine aluminum sprocket. March 17, 2017
Reviewer: Chris Hafner from Wolfeboro, NH United States  
It's a perfectly fine aluminum sprocket. Had I any other choice I would have preferred steel but I was in a rush and the part worked as expected.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Sprocket is well finished March 31, 2016
Reviewer: Brian Park from Alexandria, VA United States  
Sprocket is well machined and finished.  It fit tightly on the motor shaft.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
gear February 6, 2015
Reviewer: Steven Brown from American Fork , UT United States  
Expensive.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
. April 8, 2014
Reviewer: Anonymous Person from San Antonio, TX United States  
.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Sprocket April 3, 2014
Reviewer: Steven from Maple Grove, MN United States  
It did not have set screw drilled or tapped. It did not say this in description. I was able to drill and tap the hole and use my own set screw. Not a big deal, but annoying that it was not ready to install. Keyway does not match the keyway on the PG71 gearbox and is off by a little. I was able to make a custom key to fit sprocket to gearbox. I would not purchase this item again and would find another source.

Was this review helpful to you?

View All Customer Reviews

Browse products in the same categories:

Sprockets and Chain
Browse ALL Products