Home > Gears >

16T 20DP 10mm Round Bore with 4mm Keyway, Steel Gear (am-2088)

 
Price: $12.00

Stock Status: In Stock
Qty:

Info Downloads
 
Product Overview:
This gear can be used on the any of the PG Series Gearmotors, fitting on the 10mm output shaft.

Specifications:
  • Number of Teeth: 16
  • Diametral Pitch: 20
  • Pitch Diameter: 0.8"
  • Pressure Angle: 14.5 Degrees
  • Pitch Diameter: 0.8"
  • Face Width: 0.55"
  • Overall Width: 0.58"
  • Bore: 10mm (0.395") diameter hole w/ 4mm (0.158") keyway
  • Material: 4140 steel, cold formed into gear teeth
  • Weight: 0.08 Pounds

Average Customer Review: 4.5 of 5 Total Reviews: 5 Write your own review!

  0 of 0 people found the following review helpful:
 
Good strong gear February 6, 2017
Reviewer: Roy Visser from Greentown, IN United States  
I can use this with confidence of durability.  Nice part

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good Gear, but need a better key May 24, 2016
Reviewer: William Walter from Lowell, MA United States  
Note the am-1249 4mm key is not quite the right size for this gear and the PG motors. The Key needs to be taller (~5mm). With the right key I think this would be a good gear, but the am-1249 will loosen up and fall out if not held captive. Even with the key being held captive we found that the gear/shaft interface would get sloppy with use.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Nicely made March 16, 2016
Reviewer: Colin Steele from London, ON Canada  
Well built, but soft enough to shred some teeth.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
February 28, 2014
Reviewer: Kevin Reid from Guelph, ON Canada  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Gearmotor drive gear March 4, 2013
Reviewer: Dan Marten from Los Angeles, CA United States  
This is a great product to make available since the motor is primarily metric and matching gears can be hard to find.  The only thing I would have appreciated is providing a shaft key.  I did find a source for these so it works out OK.  The gear design details helped select matching gears.

Was this review helpful to you?


Browse products in the same categories:

Gears
Browse ALL Products