Toughbox® Mini (am-0654)

Home > Gearboxes >

Price: $77.00

Stock Status: In Stock

Qty:

Info

Downloads

Product Usage:
All AndyMark gearboxes require grease for proper operation and long life. We suggest using our red tacky grease, am-2768. We also encourage that the user powers the gearbox continuously for 30 minutes without grease to allow the gear teeth to wear in. While we do design with short run times in mind, this 'run in' period for smooth gearbox operation, is recommended. Once this is completed, thoroughly grease the gear teeth periodically to ensure smooth operation.

Product Overview:
This is the Toughbox Mini. It is similar to the Toughbox, but it is slightly smaller in profile and is 1/2 pound lighter. The Toughbox Mini uses the same interior parts as our standard Toughbox, and is shipped un-assembled.

Toughbox Mini accepts two (or one) 2.5 inch CIM Motors (not included). Hardware is included with the gearbox for attaching two of these motors.

Specifications:

Overall Ratio: 12.75:1 (standard)
Gear material: 4140 steel
Gear type: spur gears, 20 dp, 14.5 degree pressure angle
Gearbox housing material: Nylon 6/6 with long fiberglass fill
Output shaft: 1/2 inch diameter, with 1/8" keyway, 4140 steel
Weight: 1.95 pounds
Input Gear: CIM Gear, 14 tooth, 0.315 inch bore w/ 2mm keyway
Large Cluster Gear: 50 tooth, 3/8 inch hex bore
Small Cluster Gear: 14 tooth, 3/8 inch hex bore
Large Output Gear: 50 tooth, 1/2 inch hex bore

Optional Gear Ratios:

These ratios can be ordered here: ToughBox Mini Options

Ratio	CIM Gear	Lg. Cluster Gear	Sm. Cluster Gear	Lg. Output Gear
10.71:1	14 tooth	50 tooth	16 tooth	48 tooth
8.45:1	14 tooth	50 tooth	19 tooth	45 tooth
5.95:1	14 tooth	50 tooth	24 tooth	40 tooth

Weight Reduction with Optional Parts:
Aluminum Large Cluster Gear can replace the standard steel 50 Tooth Large Cluster Gear.
Aluminum Large Output Gear can replace the standard steel 50 Tooth Large Output Gear.

Additional Encoder:
An optional am-3132 Encoder can be purchased and added to this Toughbox.

Optional Output Shafts:
T-Box Long Output Shaft (steel), which is 3.5 inches longer than the standard output shaft
Toughbox Hex Output Shaft* (steel)
Toughbox Hex Long Output Shaft* (steel)
Toughbox Hex Output Shaft* (7175 aluminum)
Toughbox Hex Long Output Shaft* (7175 aluminum)

Aluminum Hex Output Shafts:
* The Toughbox can use a hex output shaft, but a FR8ZZ-HexHD bearing (am-2986) MUST be ordered SEPARATELY to replace the FR8ZZ bearing supporting the output shaft.

Videos:

Made in the USA:

Bearings and screws were not made in the USA. All other components were designed, manufactured and assembled in the United States of America.

Average Customer Review:

4.5 of 5 Total Reviews: 10 Write your own review!

0 of 0 people found the following review helpful:

Tough box mini(am-0654)	March 29, 2016
Reviewer: Alex Domkowski from Franklin, TN United States

Was this review helpful to you?

0 of 0 people found the following review helpful:

	January 29, 2016
Reviewer: Anonymous Person

Was this review helpful to you?

0 of 0 people found the following review helpful:

toughbox mini	February 3, 2015
Reviewer: Tom Ochs from charlevoix, MI United States

great gearbox, great price, just the item we needed

Was this review helpful to you?

0 of 0 people found the following review helpful:

	January 29, 2015
Reviewer: Anonymous Person from Iowa

Was this review helpful to you?

0 of 0 people found the following review helpful:

Encoder mounting	August 2, 2013
Reviewer: A. Yeckley from Milan, OH

Be advised that you will need to have a #3-48 tap and corresponding drill bit in order to mount a US Digital Encoder. The holes are piloted, but not tapped.

Was this review helpful to you?

View All Customer Reviews

Browse products in the same categories:

Gearboxes
Gearboxes > Single Speed Gearboxes
Browse ALL Products


Cooler for CIM Motor (am-2865)	Nano Tube 31, Two 500 Key Shafts (am-0688)	Sonic Shifter	Nano Tube 20, Two 1/2" Key Shafts, 2 motor inputs (am-0809)
$9.00	$179.00	$279.00	$185.00