Home > Wheels >

8" Rubber Treaded Wheel w/ 1/2" Bearings (am-0570)

 
Price: $20.00

Stock Status: In Stock
Qty:

Info Downloads
 
Product Overview:
This is a 2010 FIRST Wheel, provided in the FRC Kit of Parts, with two R8 ball bearings (1/2 inch bore) pressed into each wheel.

Specifications:
  • Diameter: 8 inches
  • Body Material: black polycarbonate
  • Tread Material: 65A durometer urethane rubber
  • Weight: 0.73 pound
  • Bore: 0.5 inch diameter bearing bore
  • Bolt Pattern: six holes (0.17 inch diameter) on a 1.875 inch diameter bolt circle.
  • Coefficient of friction: 1.0 static (on tight pile carpet)
Usage:
Use #10-24x3/4 thread forming screws to attach sprockets or hubs to this wheel. Three (3) screws are sufficient for each wheel. With Sprocket: With Bearings:
  • To press bearings into this wheel (for a free spinning wheel or for use with a sprocket), two ball bearings need to be pressed into the wheel (one on each side). The ball bearing must have a 1.125" od. For a 1/2" id, use am-0029. For a 3/8" id, use am-0209.
Made in the USA:
Bearings were not made in the USA. All other components were designed, manufactured and assembled in the United States of America.


Average Customer Review: 5 of 5 Total Reviews: 2 Write your own review!

  0 of 0 people found the following review helpful:
 
Just what I needed May 19, 2013
Reviewer: Anonymous Person from Homewood, AL United States  
Not wheels for a robot but rather for a smooth operating camera dolly. This was a low budget get 'er done device. The wheels worked great.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Wheels worked incredible November 2, 2011
Reviewer: Chi Phi from Knoxville, TN United States  
We used Andy Mark wheels for a soapbox derby contest, and they worked out fantasitcally! thank you guys for all of your help

Was this review helpful to you?


Browse products in the same categories:

Wheels
Wheels > Rubber Treaded Wheels
Browse ALL Products


$1.00
$14.00
$19.00
$33.00