8" Dualie Plastic Omni Wheel w/ 1/2" Bearings (am-0475)

Home > Wheels >

Price: $74.00

Stock Status: In Stock

Qty:

Info

Downloads

Product Overview:
8" Dualie Plastic Omni Wheel

Specifications:

Diameter: 8 inches
Width Across Middle: 2.04 inches
Width Including Screws: 2.22 inches
Bore: 1.125 inch diameter bore, 1/4 inches deep on either side, 0.95 inch diameter thru hole
Bolt Pattern: 6 hole on a 1.875" diameter bolt circle
Body Material: Black Polycarbonate
Load Capacity: 120 pounds (rollers don't spin pas this weight)
Weight:2.2 pounds
Number of Rollers: 36
Roller Material: Black SBR Rubber
Roller Durometer: 80A
Roller Bearing Material: Brass
Roller Axle: Steel Dowel Pin
Roller Diameter: 3/4 inch
Repairable by removing interior #10-32 screws and perimeter M3 screws

Included Hardware:

Usage:
With Sprocket:

If you wish to drive this wheel with a sprocket, then the sprocket needs to be attached to the side of the wheel, and one ball bearing needs to be pressed into the wheel (on one side). For 1/2" id, use two am-0029 bearings and two am-0030 bearings. For 3/8" id use four am-0209 bearings.

With Bearings:

One ball bearing needs to be pressed into the wheel (on each side, totaling 4). For 1/2" id, use two am-0029 bearings and two am-0030 bearings. For 3/8" id use four am-0209 bearings.

Made in the USA:

Bearings and screws were not made in the USA. All other components were designed, manufactured and assembled in the United States of America.

Average Customer Review:

5 of 5 Total Reviews: 1 Write your own review!

0 of 0 people found the following review helpful:

1	January 27, 2012
Reviewer: Peggy Painter from Verona, MO United States

1

Was this review helpful to you?

Browse products in the same categories:

Wheels
Wheels > Omni Wheels
Browse ALL Products


12 gauge red black bonded wire, 25ft length (am-0904)	Reflective Material, 3M, 4" wide x 21.5' long, adhesive backed (am-2465)	2.5" CIM Motor (am-0255)	39 Tooth HTD Plastic Drive Pulley Kit (am-2361)
$17.50	$59.00	$28.00	$15.00