Product Overview:
This includes all of the parts for the US Digital Encoder used on the AndyMark Super Shifter. This part does NOT include the cable. US Digital part number is E4P-250-250-N-S-D-D-B. In the past, this same exact part had the US Digital part number as E4P-250-250-D-D-D-B.
Specifications:
Included Hardware:
- One - 250 count encoder wheel
- One - circuit board
- One - plastic mount base
- One - plastic cap
- Two - #10-32x1/2 screws
Alignment tip:
During installation, place the encoder disc on the shaft so that the outside face of the encoder disc is flush with the ends of the clips of the plastic mount base.
Installation tip:
If the encoder wheel slides loosely onto the 1/4" shaft, then follow this procedure to make the inside diameter of the encoder wheel collet to be slightly smaller:
Use a medium-sized pair of pliers and gently squeeze the collet portion of the encoder wheel. This is the longer protruding part of the encoder wheel with the parallel slits in the body. If you gently squeeze the sides together, equally, in 2 or 3 different locations, you can make the inside diameter of the encoder wheel slightly smaller. Then, the wheel will fit on the new shaft.
