Home > Extrusion and Structure
Choose a sub category:
Conveyor System Parts REV Extrusion Building System
Conveyor System Parts REV Extrusion Building System
REV Robotics Extrusion Building System. The REV system has many low cost brackets for structural purposes, along with mounting bearings, pneumatics, and motors. These parts can make an endless array of robot structures and allows for easy adjustment of gearboxes power transmissions, and all kinds of robotics actuators.
Sort By:
Page of 5
Modulox 6-slot Channel Product Overview:
For smaller applications the REV Building System also comes in a 15mm x 15mm square extrusion. The slots are designed to fit standard M3 hardware rather than expensive t-nuts.

Fastener Usage:
REV Robotics 15mm extrusion uses M3 Hexhead hardware. We recommend building with the head of the screw in the slot and a Nylock nut on the outside. Regular M3 nuts will also fit in the shaft, but Nylock nuts will not fit.

Features:
  • All holes can be tapped with an M3 Tap
  • Slots are compatible with standard M3 hex nuts and M3 hex-head cap screws as studs.
Specifications:
  • Material: 6061 Aluminum, clear anodized
  • Length: 1m
  • Height: 15mm
  • Length: 15mm
  • Weight: 0.49 pounds
60 Degree REV Bracket
Product Overview:
This is a ball bearing with a 90 degree ground groove, fabricated into the outer race of the ball bearing, designed to be used for linear motion applications. This bearing fits perfectly onto the integrated channel located on the 1" REV Building System Aluminum Extrusion.

Specifications:
  • Material: Steel
  • Weight: 0.088
  • Industry Size: RM2ZZ
  • ID: 0.375"
  • OD: 1.21"
Product Overview:
This 90 degree flat bracket is used with the REV 15mm Extrusion System. This product is a package of 10 individual brackets.

Specifications:
  • Material: 6061 Aluminum
  • Thickness: 2mm
  • Length: 35mm
  • Width 35mm
  • 3.4mm holes on 10mm grid
Product Overview:
This 45 degree flat bracket is used with the REV 15mm Extrusion System. This product is a package of 10 individual brackets.

Specifications:
  • Material: 6061 Aluminum
  • Thickness: 2mm
  • Length: 45mm
  • Width 40mm
  • 3.4mm holes on 10mm grid
Product Overview:
This flat variable degree bracket is used with the REV 15mm Extrusion System. This product is a package of 10 individual brackets.

Specifications:
  • Material: 6061 Aluminum
  • Thickness: 2mm
  • Length: 40mm
  • Width 30mm
  • 3.4mm holes on 10mm grid
Product Overview:
This flat cross bracket is used with the REV 15mm Extrusion System. This product is a package of 10 individual brackets.

Specifications:
  • Material: 6061 Aluminum
  • Thickness: 2mm
  • Length: 50mm
  • Width 50mm
  • 3.4mm holes on 10mm grid
Product Overview:
This flat "T" bracket is used with the REV 15mm Extrusion System. This product is a package of 10 individual brackets.

Specifications:
  • Material: 6061 Aluminum
  • Thickness: 2mm
  • Length: 50mm
  • Width 30mm
  • 3.4mm holes on 10mm grid