Home > Browse ALL Products > Bumpers & Accessories >

Bumper Kit for Rhino Track Drive Module (am-3358)

Picture only representative.
 
Price: $49.00

Stock Status: In Stock
Qty:

Info Downloads
 
Product Overview:
This bumper kit is designed and contains parts to attach bumpers to a LEFT and RIGHT Rhino Track Drive Module (am-3322)

This product focuses on the hardware needed to mount two sets of bumpers to a Rhino Track Drive module, with included parts for a LEFT module and a RIGHT module. The CAD picture above shows the LEFT module with brackets. This product does not include wood, pool noodles, fabric, or numbers.

Weight of all hardware listed below = 1.9 pounds

Instructions for preparing plywood for the included brackets is available here. On the Documents tab, individual prints for each bracket are available, along with prints calling out the mounting holes for the brackets.

Included Hardware:
  • One - Front Left Bumper Bracket for Rhino Track Drive Module (am-3352)
  • One - Front Right Bumper Bracket for Rhino Track Drive Module (am-3353)
  • One - Back Left Bumper Bracket for Rhino Track Drive Module (am-3354)
  • One - Back Right Bumper Bracket for Rhino Track Drive Module (am-3355)
  • Thirty Two - #10-32 Tee Nut (am-1143)
  • Sixteen - #10-32 Thumb Screw (am-1390)
  • Eight - 1/8" dia x 1" long dowel pin (am-1019)
  • Six - #10-32 x 5/8 SHCS (am-1007)
  • Six - 1/4-20 x 5/8 SHCS (am-1053)
  • Six - #10-32 Nylock Nut (am-1042)
  • Six - 1/4-20 Nylock Nut (am-1042)

Average Customer Review: 4.5 of 5 Total Reviews: 4 Write your own review!

  0 of 0 people found the following review helpful:
 
Better pictures or actual documentation would help February 17, 2016
Reviewer: Anonymous Person from Owatonna, MN United States  
Some parts were missing (maybe) some may not be needed. Its hard to tell from the minimal documentation available via andymark.com. We in the Midwest are used to a "KIT" being just that, all the parts and instructions to build something. It doesn't mean we'll actually use them or not do it our own way in the long run. But they are a starting point that "should" work.

(AndyMark Response: Thank you for the feedback we are looking to improve documentation in the future)

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Bumper Kit for Rhino Track Drive Module (am-3358) February 17, 2016
Reviewer: Mike Young from Blythewood, SC United States  
easy to order
quick delivery
good price.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Brackets were and easy install February 17, 2016
Reviewer: Damon Radel from middletown , CT United States  


Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
The CAD link is broken January 26, 2016
Reviewer: Anonymous Person  
As of 1/21/16, the CAD link is broken; also, the templates provided are not very helpful in replicating this bumper design.

Was this review helpful to you?


Browse products in the same categories:

Browse ALL Products > Bumpers & Accessories
Browse ALL Products
New Products