Home > Electrical Components > Motors >

AndyMark 775 RedLine Motor with 12 Tooth Pinion Installed (am-3775_12T)
AndyMark 775 RedLine Motor with 12 Tooth Pinion Installed (am-3775_12T)
Alternative Views:

Price: $26.00

Stock Status: In Stock

Info Downloads
Product Overview:
We give you the AndyMark 775 RedLine Motor. A fast and fierce 775-class motor that FRC teams know and love, capable of delivering immense power in a small, lightweight package. This ball-bearing supported, air cooled motor is best used in high-speed applications where the motor will not be stalled for long periods such as shooters, conveyors, and intake mechanisms. With sufficient care and attention to your application's traction limit, this motor has proven effective in FRC drive applications as well.

This variation of the RedLine comes with a 12 tooth, 32 DP pinion already pressed on allowing this motor to be installed into EVO Slim for RedLine, EVO Shifter for RedLine and DeCIMate gearboxes. Not only does this take the risk of damaging the motor during pinion installation out of your hands, it also means that this counts as a COTS part in FRC, and bringing these as spares to your competition won't count against your weight allowance for 2018.

Product Usage:
Motors need air flow to keep cool. A hot motor won't last nearly as long, or deliver the power it once did new. To keep a RedLine cool and in great shape, use a 775 Vent Plate Spacer, am-3650. All of our gearboxes that use this motor have vent plate spacers included with your purchase.

Physical Specs:
  • Overall Size:
    • Overall Length: 3.826 in. (97.17 mm)
    • Max Diameter: 1.744 in. (44.3 mm)
  • Output Shaft Geometry:
    • Length: 0.346 in (8.8 mm)
    • Diameter: 0.19 in. (5 mm)
  • Mounting Geometry:
    • Quantity 2, M4 x 0.7 Tapped Holes
    • 1.142 in. (29 mm) Bolt Circle
  • Weight: 0.806 Pounds
Theoretical Performance Specs:
  • Voltage: 12 VDC
  • No Load Free Speed: 19649 RPM (+/- 10%)
  • No Load Current: 3.1 A
  • Stall Current: 106.9 A
  • Stall Torque: 0.627 N-m (5.54 in-lbs) (+/- 10%)
  • Maximum Power: 322.6 Watts (+/- 10%)
Useful Additional Parts: Motor has the following information laser etched on the flux ring:
CCL part number: DF-30F-2002
Logo: AndyMark Logo
AndyMark Part number: am-3775
Voltage: 12VDC
Date Code: YYWWD

Average Customer Review: 4.5 of 5 Total Reviews: 3 Write your own review!

  0 of 0 people found the following review helpful:
A good motor March 6, 2018
Reviewer: Todd Langley from Tulsa, OK United States  
I mistakenly bought this handy little motor with 12 tooth pinion to go with the 57 sport gearbox. That gearbox takes the 16 tooth pinion. That said, the 12 tooth pinion was hard to press on the shaft and even harder to remove once we realized our mistake. It works great now.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
March 6, 2018
Reviewer: Kevin Tracey from Parkland, FL United States  

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Redline motor February 22, 2018
Reviewer: Lonny Weissman from San Jose, CA United States  
These are great motors and their performance is more than we had expected. We are4 using them in the new EVO Redline Transmissions.

Was this review helpful to you?

Browse products in the same categories:

Electrical Components > Motors
Electrical Components
Browse ALL Products
New Products