42 Tooth HTD Pulley

This product is currently unavailable for purchase.

This is the 42 tooth pulley used in the AM14U family of chassis. It works with all 5 mm pitch HTD timing belts. This pulley has a 1.875 in. bolt circle making it easy to attach to many of our motio...Read More

View Full Details

Product Overview

This is the 42 tooth pulley used in the AM14U family of chassis. It works with all 5 mm pitch HTD timing belts. This pulley has a 1.875 in. bolt circle making it easy to attach to many of our motion components. It also has a locking pattern that is compatible with many of our wheels. 

This pulley comes as two identical halves that mesh with each other to create one pulley that is the correct width for a 15 mm timing belt. 

Need to have two 15 mm belts on one pulley? Add in the 15 mm wide, 42 Tooth Pulley Extension (am-2813) and you can run two belts in two different directions. 

Specifications

  • Belt Profile: 5mm pitch HTD timing belt, 15mm wide
  • Bolt Pattern: 0.20 in. diameter holes, evenly spaced on a 1.875 in. diameter bolt circle
  • Bore: 0.95 in., with bearing pocket of 1.124 in. diameter x 0.25 in. deep
  • Flange Diameter: 2.92 in.
  • Material: Black Polycarbonate
  • Outside Diameter: 2.59 in. (at outer tooth edge)
  • Pitch Diameter: 2.632 in.
  • Product Lifecycle: replaced by <a href='/products/42-tooth-pulley'>am-2234a</a>
  • Teeth: 42
  • Weight: 0.12 lbs
  • Width: 0.89 in. (both halves assembled together)

Returns

Returns are not accepted for this product.

23 reviews

  1. star star star star star 5 out of 5 stars

    Great Pulley for Driving Wheels on Dead Axle Setup

    These have been a great pullley to use for driving wheels on a dead axle setup. On 1519, we have used these pulleys with either 6" or 8" pneumatic tires on our 2016, 2018, and 2019 robots, and have never had a single pulley failure or problem. We bolt the pulleys directly into the wheels via the 1.875" bolt circle and typically use three 1/2" round bearings on dead axles, placing 2 bearings in the wheel and 1 bearing in the outer side of the pulley. They work great!

    KS from Milford

    Verified Purchaser

  2. star star star star star 5 out of 5 stars

    Review

    5 Stars

    DB from Westfield

  3. star star star star star 5 out of 5 stars

    Review

    5 Stars

    JJ from Round Rock

  4. star star star star star 5 out of 5 stars

    Everything as planned.

    The equipment that we ordered was delivered as promised. There was some slight delay in the delivery date, but it's China. Usually items are held up longer, so we were happy.

    JB from Dayton

  5. star star star star star 5 out of 5 stars

    Review

    5 Stars

    LM from Uniontown

  6. star star star star star 5 out of 5 stars

    Great Pulley

    We actually used this as a conversion for a wheel hub for a shooter device. It worked for this purpose excellently.

    JV from Eustis

  7. star star star star empty_star 4 out of 5 stars

    Just Right

    This was exactly what we needed.

    DG from Northport

  8. star star star star star 5 out of 5 stars

    "Pulley 42 tooth(am-2234)"

    "5 stars"

    AD from Franklin

  9. star star star star star 5 out of 5 stars

    Review

    Product received promptly and as depicted in description.

    ER from Howell

  10. star star star star star 5 out of 5 stars

    Review

    5 Stars

    RR from Russiaville

  11. star star star star star 5 out of 5 stars

    Review

    5 Stars

    MT from Plainfield

  12. star star star empty_star empty_star 3 out of 5 stars

    "Meh"

    "They kinda tasted funny but good overall texture. Not the best lunch but good and filling."

    PC from Hartford

  13. star star star star star 5 out of 5 stars

    Quick and easy adapting to Andy mark wheels

    Easy to use

    SW from West Valley City

  14. star star star star empty_star 4 out of 5 stars

    Review

    4 Stars

    CT from Idaho Falls

  15. star star star star star 5 out of 5 stars

    Good sprockets.

    Easy to integrate into FTC. Cost competitive with Gates.

    BP from Lisle

  16. star star star star star 5 out of 5 stars

    Review

    5 Stars

    MT from Alameda

  17. star star star star empty_star 4 out of 5 stars

    "Great Product...one suggestion, though..."

    "This is an awesome design - and very easy to implement. The recessed surface that mates to wheels is excellent for solid construction. The recesses, however, for screw heads are too small - and when using the integrated washer hex head screws typically supplied (thread cutting) it is not possible to fit a socket or nut driver between the screw and the sides of the recess."

    TM from Reidsville

  18. star star star star star 5 out of 5 stars

    AndyMark parts

    Our FIRST team has come to rely on AndyMArk for most of our robot parts. They have never let us down. Frank Farrell

    FF from Philadelphia

  19. star star star star star 5 out of 5 stars

    Review

    5 Stars

    Cr from Upsala

  20. star star star star star 5 out of 5 stars

    Review

    5 Stars

    MP from Lynn

  21. star star star star star 5 out of 5 stars

    Fast and Easy

    Always Fast shipping and friendly service

    JN from Liberty Township

  22. star star star star star 5 out of 5 stars

    Review

    5 Stars

    KG from Vassalboro

  23. star star star star star 5 out of 5 stars

    Review

    5 Stars

    JG from Eustis

Top of Page