Home > Gearboxes >

PG188 Gearbox, 10 mm Round Output with 9015 Motor (am-3183)
PG188 Gearbox, 10 mm Round Output with 9015 Motor (am-3183)
 
Price: $89.00

Stock Status:(Out of Stock)
Qty:

  
Info Downloads
 
Product Overview:
The is an assembly of our 188:1 reduction PG188 Gearbox with the am-0912 motor. The PG188 contains four planetary stages inside. The output shaft geometry is 10mm with a 4mm keyway, just like our other PG series gearmotors (PG27 and PG71). For mounting any PG Series gearmotors, am-2197 can be used to attach to framing with 0.264" holes.

Physical Specs:
  • Overall Length: 6.2"
  • Maximum Diameter: 1.775 inches
  • Output Shaft size: 10mm (0.393") dia with 4mm (0.157") keyway
  • Weight: 1.92 lbs
  • Mounting Holes: M4x0.7 threaded hole (4) x 9mm deep
  • Electrical Connection Geometry: 0.15" wide spade connectors (2)
  • Gear Material: steel, formed from powdered metal
  • Body Material: steel
  • Lubrication: The gearbox is pre-greased and needs no further lubrication.
Theoretical Performance Specs:
  • Gearbox Reduction: 188:1
  • Voltage: 12 volt DC
  • No Load Free Speed: 75 rpm
  • No Load Current: 1.3 amps
  • Gearbox Output Power: 90 Watts
  • Stall Torque: 33 ft-lbs
  • Stall Current: 63 amps
  • Maximum torque applied at shaft which breaks gearbox: 39 ft-lbs (breakage point is shearing of shaft)

Average Customer Review: 5 of 5 Total Reviews: 2 Write your own review!

  0 of 0 people found the following review helpful:
 
PG188 Gearbox and am3183 Motor April 30, 2018
Reviewer: Caleb Nehls from Tyler, TX United States  
This motor did exactly what we needed it to do. The problem was finding a power supply that would get us to the current needed. Very happy with the motor itself. The mount should not be aluminum. With the torque output of this motor we had to scrap the aluminum motor and make our own from steel.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
Great combo of both speed and torque December 17, 2015
Reviewer: John D from Oregon, USA  
I needed a smaller form factor than the CIM motor options and more speed than the other PG188 gearbox with motor options offered.  This combo met my needs nicely!  Thanks, AndyMark!

Was this review helpful to you?


Browse products in the same categories:

Gearboxes
Gearboxes > Planetary Gearboxes & Stages
Browse ALL Products
Electrical Components > Motors