Search results for “mounting brackets”

This bracket can be used to mount motors and gearboxes, or hold a standard bearing. Description Specifications Documentation This simple b...

These Mounting Brackets for the Robits Building System are to fasten motors to your robot. Description Specifications Documentation These Mou...

This chain is designed to hold wires in check while attached to a moving object. Description Specifications Documentation They are partic...

Description Specifications Documentation This bracket is perfect for mounting motors to 1x1 Tube or taking advantage of a corner for the perfe...

Description Specifications Documentation This is the perfect mounting bracket for a motor or bearing that needs to be positioned at the end o...

A small 90 degree bracket with 3 holes on one side and 1 on the other. Description Specifications Documentation This is a handy-dandy br...

Description Specifications Documentation This bracket is the perfect mounting bracket for a motor or bearing that needs to be directly above ...

This bracket is perfect for making robust 90 degree connections between two robot frame sections. Description Specifications Documentation ...

Any motor or gearbox with a 2-inch diameter bolt circle can be mounted in this bracket. Description Specifications Documentation This brac...

This bracket is used to assist mounting bumpers to the sides of an AM14U6 chassis in accordance with the 2026 FRC bumper rules. Description Speci...

This bracket is perfect for making robust 90 degree connections between two robot frame sections. Description Specifications Documentation ...

Description Specifications Documentation This bracket allows attachment of an air cylinder to extrusion that has a 1 in. wide dimension s...

This switch had XT30 connectors and a mounting bracket for use with the Robits or goBILDA platforms. Description Specifications Documentation ...

This is a plastic bracket for mounting the Clippard Air Tank. Description Specifications Documentation This is a plastic bracket for mount...

These aluminum plates are included in the 2024 KitBot. Description Specifications Documentation These plates are included in the 20...

This is a kit of all the bumper hardware and bracketry needed to mount bumpers to an AM14U6 chassis. Description Specifications Documentation Wha...

These gussets are used with 1 in. based building systems. Description Specifications Documentation AndyMark strives to be a one-stop-sho...

This gusset can be used to support the output shaft of a Blue Sport Gearbox, or by itself to attach a bearing where needed. Description Specific...

This bracket makes up part of the Intake System Kit. Description Specifications Documentation This bracket makes up part of the Intake Sy...

This bracket is used to assist mounting bumpers to the sides of an AM14U4 chassis in accordance with the 2019 FRC bumper rules. Description Spec...

Description Specifications Documentation These components create the items from the Raw Materials section of the KitBot guide. am-5797 Full K...

This plate is the perfect size for mounting the Turntable Bearing and the 200T Turntable Gear in the Robits Turntable. Description Specification...