This gear can be used in the Toughbox, replacing the 14 tooth small cluster gear. It would be paired with a 40 Tooth Large Output Gear, in order to increase the output speed of the ToughboxÂ®.
When using this cluster gear you may want to add the 3/16 Thick Nylon Spacer (am-1181) to the shaft. This gear is narrower than the standard Toughbox cluster gear and the spacer fills the gap
Standard Toughbox output reduction: 12.76:1
Using this gear and a 40 Tooth Large Output Gear yields a 5.95:1 ratio.
- Number of teeth: 24
- Diametral pitch: 20
- Pressure angle: 14.5 degrees
- Pitch Diameter: 1.2 inch
- Face width: 0.375 inch
- Overall width: 0.400 inch
- Bore: 0.377 inch hex hole
- Material: 4140 steel, cold formed into gear teeth
- Weight: 0.17 lbs.